25 Apr
2014
25 Apr
'14
1:29 p.m.
I managed to get a flickr account. I hope it works, the link is
https://www.flickr.com/photos/computer-room/
Uploaded the first set of pictures. All stuff is just put there,
waiting to create a nice setup.
Going to paint one wall tomorrow. At the base the length
of the wall is 15 meters, At the top "triangle" it is 5 meters high.
Not going to be much fun.
- Henk, PA8PDP
25 Apr
25 Apr
1:52 p.m.
On Apr 25, 2014, at 1:29 PM, Henk <henk.gooijen at hotmail.com> wrote:
I managed to get a flickr account. I hope it works,
the link is
https://www.flickr.com/photos/computer-room/
Uploaded the first set of pictures. All stuff is just put there,
waiting to create a nice setup.
Cool! Looks like a big area. Bigger than mine. ;-) But I have
an 'upstairs' and a basement for storage and light work.
Going to paint one wall tomorrow. At the base the length
of the wall is 15 meters, At the top "triangle" it is 5 meters high.
Not going to be much fun.
I had to paint what is my office and storage room because there
was some mold on the walls. Not fun. Took 2 weekends.
TTFN - Guy
2:12 p.m.
did u wash ur walls?
On Fri, Apr 25, 2014 at 3:52 PM, Guy Sotomayor <ggs at shiresoft.com> wrote:
On Apr 25, 2014, at 1:29 PM, Henk <henk.gooijen at hotmail.com> wrote:
I managed to get a flickr account. I hope it
works, the link is
https://www.flickr.com/photos/computer-room/
Uploaded the first set of pictures. All stuff is just put there,
waiting to create a nice setup.
Cool! Looks like a big area. Bigger than mine. ;-) But I have
an 'upstairs' and a basement for storage and light work.
Going to paint one wall tomorrow. At the base the length
of the wall is 15 meters, At the top "triangle" it is 5 meters high.
Not going to be much fun.
I had to paint what is my office and storage room because there
was some mold on the walls. Not fun. Took 2 weekends.
TTFN - Guy
2:28 p.m.
On Apr 25, 2014, at 2:12 PM, Adrian Stoness <tdk.knight at gmail.com> wrote:
did u wash ur walls?
Absolutely. Used a chlorine solution and then had to put a mold
inhibiting primer before I applied the paint. That's why it took so
long to paint two relatively small rooms.
TTFN - Guy
On Fri, Apr 25, 2014 at 3:52 PM, Guy Sotomayor <ggs at shiresoft.com> wrote:
>
> On Apr 25, 2014, at 1:29 PM, Henk <henk.gooijen at hotmail.com> wrote:
>
>> I managed to get a flickr account. I hope it works, the link is
>> https://www.flickr.com/photos/computer-room/
>> Uploaded the first set of pictures. All stuff is just put there,
>> waiting to create a nice setup.
>
> Cool! Looks like a big area. Bigger than mine. ;-) But I have
> an 'upstairs' and a basement for storage and light work.
>
>>
>> Going to paint one wall tomorrow. At the base the length
>> of the wall is 15 meters, At the top "triangle" it is 5 meters high.
>> Not going to be much fun.
>
> I had to paint what is my office and storage room because there
> was some mold on the walls. Not fun. Took 2 weekends.
>
> TTFN - Guy
>
>
2:44 p.m.
killsall paint eh?
glad to hear u did it proper (lives in the land of moldy basements)
3:07 p.m.
On Apr 25, 2014, at 2:44 PM, Adrian Stoness <tdk.knight at gmail.com> wrote:
killsall paint eh?
glad to hear u did it proper (lives in the land of moldy basements)
Don't recall the brand. I wasn't too worried about it since it was between
the cabinets (since removed) and wall. It appeared to have occurred a
while ago and seemed to be due to moisture collecting between the
cabinet and the wall rather than leaks.
TTFN - Guy
3:12 p.m.
painting the floor and walls go long ways to help keep the moisture down
On Fri, Apr 25, 2014 at 5:07 PM, Guy Sotomayor <ggs at shiresoft.com> wrote:
On Apr 25, 2014, at 2:44 PM, Adrian Stoness <tdk.knight at gmail.com> wrote:
killsall paint eh?
glad to hear u did it proper (lives in the land of moldy basements)
Don't recall the brand. I wasn't too worried about it since it was between
the cabinets (since removed) and wall. It appeared to have occurred a
while ago and seemed to be due to moisture collecting between the
cabinet and the wall rather than leaks.
TTFN - Guy
4:38 p.m.
On 04/25/2014 03:12 PM, Adrian Stoness wrote:
painting the floor and walls go long ways to help keep
the moisture down
I applied a concrete sealer to mine, then covered the floor with
composition vinyl tile (the thick type with the pattern clear through,
so cleaning up scuff marks, etc. is mostly a matter of sanding them off
using a floor buffer screen.
I applied a moisture barrier to the walls (roofing felt), then built
stud walls about 1.5" from the concrete stem walls, leaving lots of room
for fishing cables. A layer of sheetrock and mud finished it all off.
It's dry and warm--very often, better than the "living quarters" above it.
This was part of a larger house remodeling project, so the cost was not
too onerous. One thing that I also thought to do was to install several
empty runs of thinwall conduit between floors and drop a length of 10
AWG steel wire through them. That way, you just cut into the walls
above and below it and fish with a magnet to find the wire, and attach
your fishtape. These are outside walls and I hate digging through
insulation...
--Chuck
26 Apr
26 Apr
12:23 a.m.
keep the machines a little off the wall and use ventilators to
circulate. fungus hate that. you don't have to have them on 24/7. just a
hour a day will do. if you do it at an hour after noon, some heat will
circulate as well. in th summer it is better to do it around 10 in the
morning.
On 26-04-14 00:07, Guy Sotomayor wrote:
On Apr 25, 2014, at 2:44 PM, Adrian Stoness
<tdk.knight at gmail.com> wrote:
--
Met vriendelijke Groet,
Simon Claessen
drukknop.nl
killsall paint eh?
glad to hear u did it proper (lives in the land of moldy basements)
Don't recall the brand. I wasn't too worried about it since it was between
the cabinets (since removed) and wall. It appeared to have occurred a
while ago and seemed to be due to moisture collecting between the
cabinet and the wall rather than leaks.
TTFN - Guy
29 Apr
29 Apr
10:49 p.m.
Very impressive. Looks like a complete data center in there.
Sent from my iPhone /////c
On Apr 25, 2014, at 3:29 PM, Henk <henk.gooijen at
hotmail.com> wrote:
I managed to get a flickr account. I hope it works, the link is
https://www.flickr.com/photos/computer-room/
Uploaded the first set of pictures. All stuff is just put there,
waiting to create a nice setup.
Going to paint one wall tomorrow. At the base the length
of the wall is 15 meters, At the top "triangle" it is 5 meters high.
Not going to be much fun.
- Henk, PA8PDP
30 Apr
30 Apr
9:20 a.m.
Well, there is a lot of stuff hidden behind the stuff at the front
and the racks in the back. I have 3 RM03 drives (visible), but
just before them are 3 RK07 drives (not visible). There are 20
H960 racks and 4 DECwriters and one DECprinter.
Several terminals (VT05, VT-55, VT220, VT240, VT320, VT420, VT510,
one VT525), etc. Also one VT180.
I have the following PDP-11 CPUs: LSI-II, /03, /04/, /05, /10, /20,
/23, /23+, /24, /34, /35, /45, /50, /53, /60, /70, /73, /83, /93.
That's pretty much every PDP-11 CPU model.
Of the VAXen I have 2 VLC4000, VAX4000/500, VAXstation, VAXserver,
microVAX II and III.
Two RA60, several RA81, a few RA90's, several RK05, ditto on RL02,
RX01, RX02, and PC05. Two TE16's, one TU10, one TU80, one TU80+,
a few TK50 and TK70 and the lovely DECtape.
Lots of cables, modules and what not that I have forgotten.
I sure will have a few "aha's" in the coming weeks :-)
When I look at all that stuff, I am amazed how I ever had all of
that in the house! Now I am figuring how to arrange everything in
a nice looking (and functional) setup. More pictures soon.
greetz,
- Henk
-----Oorspronkelijk bericht-----
From: Sam Onella
Sent: Wednesday, April 30, 2014 7:49 AM
To: General Discussion: On-Topic and Off-Topic Posts
Subject: Re: pictures of my "computer room"
Very impressive. Looks like a complete data center in there.
Sent from my iPhone /////c
On Apr 25, 2014, at 3:29 PM, Henk <henk.gooijen at
hotmail.com> wrote:
I managed to get a flickr account. I hope it works, the link is
https://www.flickr.com/photos/computer-room/
Uploaded the first set of pictures. All stuff is just put there,
waiting to create a nice setup.
Going to paint one wall tomorrow. At the base the length
of the wall is 15 meters, At the top "triangle" it is 5 meters high.
Not going to be much fun.
- Henk, PA8PDP
10:10 a.m.
I have the following PDP-11 CPUs: LSI-II, /03, /04/,
/05, /10, /20,
/23, /23+, /24, /34, /35, /45, /50, /53, /60, /70,
/73, /83, /93.
That's pretty much every PDP-11 CPU model.
I am sitting here with my mouth wide open, drool drippin from
the corners of my mouth, and turning very green with envy.
BLS
"Thou shalt not covet thy neighbor's PDP-11"
10:47 a.m.
Wow, I am totally amazed by your enumeration of systems. I think I saw only a little of
what is there when visited you 2-3 years ago. Putting the systems in a nice arrangement
also makes your collection look like a classic computer center of the 70's and
80's. I'm pretty sure that the visitor list might grow after that :)
Kind regards,
Pierre
?
-------------------------------------------------------------------------------
Pierre's collection of classic computers : http://classic-computing.dyndns.org/
________________________________
Von: Henk <henk.gooijen at hotmail.com>
An: General Discussion: On-Topic and Off-Topic Posts <cctalk at classiccmp.org>
Gesendet: 17:20 Mittwoch, 30.April 2014
Betreff: Re: pictures of my "computer room"
Well, there is a lot of stuff hidden behind the stuff at the front
and the racks in the back. I have 3 RM03 drives (visible), but
just before them are 3 RK07 drives (not visible). There are 20
H960 racks and 4 DECwriters and one DECprinter.
Several terminals (VT05, VT-55, VT220, VT240, VT320, VT420, VT510,
one VT525), etc. Also one VT180.
I have the following PDP-11 CPUs: LSI-II, /03, /04/, /05, /10, /20,
/23, /23+, /24, /34, /35, /45, /50, /53, /60, /70, /73, /83, /93.
That's pretty much every PDP-11 CPU model.
Of the VAXen I have 2 VLC4000, VAX4000/500, VAXstation, VAXserver,
microVAX II and III.
Two RA60, several RA81, a few RA90's, several RK05, ditto on RL02,
RX01, RX02, and PC05. Two TE16's, one TU10, one TU80, one TU80+,
a few TK50 and TK70 and the lovely DECtape.
Lots of cables, modules and what not that I have forgotten.
I sure will have a few "aha's" in the coming weeks :-)
When I look at all that stuff, I am amazed how I ever had all of
that in the house!? Now I am figuring how to arrange everything in
a nice looking (and functional) setup. More pictures soon.
greetz,
- Henk
-----Oorspronkelijk bericht-----
From: Sam Onella
Sent: Wednesday, April 30, 2014 7:49 AM
To: General Discussion: On-Topic and Off-Topic Posts
Subject: Re: pictures of my "computer room"
Very impressive.? Looks like a complete data center in there.
Sent from my iPhone /////c
On Apr 25, 2014, at 3:29 PM, Henk
<henk.gooijen at hotmail.com> wrote:
I managed to get a flickr account. I hope it works, the link is
https://www.flickr.com/photos/computer-room/
Uploaded the first set of pictures. All stuff is just put there,
waiting to create a nice setup.
Going to paint one wall tomorrow. At the base the length
of the wall is 15 meters, At the top "triangle" it is 5 meters high.
Not going to be much fun.
- Henk, PA8PDP
3655
days inactive
3660
days old
12 comments
8 participants
participants (8)
-
barythrin＠gmail.com -
blstuart＠bellsouth.net -
cclist＠sydex.com -
ggs＠shiresoft.com -
henk.gooijen＠hotmail.com -
p.gebhardt＠ymail.com -
simski＠dds.nl -
tdk.knight＠gmail.com