On Tue, 5 Aug 1997, Tim Shoppa wrote:
What message does it give you - "Halted" or
"?Couldn't start CP" ?
It says
CONSOLE
xxxxx xxxxxxxxxxxxx
(The ODT start message)
It's trying to boot the "default device", which is selected via some
DIPswitches on the Unibus Adapter.
It doesn't matter. But you don't plug the RA straight into those
jacks; the RA should plug into a cabinet kit on the back of the
drive's cabinet, then a black SDI cable should
run between the cabinet kit on the drive cabinet and the cabinet
kit on the CPU. Make sure the appropriate port button ("A" or
"B") is in on the drive.
The RA has a small box on the back. Out of this comes 4 cables - 2 for
the terminator, and 2 SDI cables. Those are plugged into a small box on
the bottom of the rack-mount, with 4 SDI cables running out the back to
the controller.
In other words, there must be an *even* number of cab kits involved.
Each cab kit does a parity reversal on the cable. Nothing blows
up if things are reversed, but you won't be able to access the drive.
(There are white SDI cables, which change the requirement to an odd
number. But I doubt you've got any white SDI cables - these were
generally used with RA70- and RA90-type disks.)
I have an even number. (One drive)
Try B DU0. If this doesn't work, you'll have
to feed in a MSCP bootstrap
via console ODT. (Or buy the DU boot ROM from DECdirect, if they've
still got any.)
I'll go try that.