Board Cleaning Opinions Wanted - test-drb@ccmp.vtda.org

10 May 1999

Other than the core stack the first thing I do is the 120 lb air hose.  It
cleans a lot of sins.  At least lets you see what kind of mess you have.
(what was used for glue)  Then Isopropyl, methanol, or some window cleaner
and a paint brush or soft well worn tooth brush and blasting it frequently
with air.  Use an old towel to wipe the paint brush on to clean it between
strokes.

Be sure to wear safety glasses.  Alcohol in the eyes is no fun.

Dan
-----Original Message-----
From: jeff.kaneko(a)juno.com &lt;jeff.kaneko(a)juno.com&gt;
To: Discussion re-collecting of classic computers
&lt;classiccmp(a)u.washington.edu&gt;
Date: Monday, May 10, 1999 10:30 PM
Subject: Board Cleaning Opinions Wanted

...
 Guys:

If you had a pile of impossibly dirty DEC Q-Bus boards,
what would you do? (This includes the usual disk controller card,
CPU/IO/Memory extender, a couple of corestacks, the backplane,
and the regulator card).

Jeff

___________________________________________________________________
You don't need to buy Internet access to use free Internet e-mail.
Get completely free e-mail from Juno at http://www.juno.com/getjuno.html
or call Juno at (800) 654-JUNO [654-5866]