Phil - Search for Push-In Rivets (plastic, nylon, etc.). Two of the largest mfg. of plastic Push Rivets are just east (Richco, River Forest, IL) and north (Fastex, Des Plaines, IL) of me. Both have been acquired by larger conglomerates. ? Richco (River Forest) was bought by Essentra Components (UK) in December 2011. https://www.essentracomponents.com/en-us/s/push-in-rivets Global HQ for Essentra is in your neighborhood (Ask for Samples). Langford Locks Kidlington, Oxon, OX5 1HX United Kingdom Tel: +44 (0) 1865 844572 Fax: +44 (0) 1865 844488 orders at essentracomponents.co.uk www.essentracomponents.com/en-gb ==== ITW/Fastex : Push Rivets (Des Plaines, IL) acquired by Illinois Tool Works (ITW). https://www.itw-fastex.com/rivets.html == greg, Chicago === Date: Fri, 4 Dec 2020 02:20:55 +0000 From: Philip Pemberton <classiccmp at philpem.me.uk> To: cctalk at classiccmp.org Subject: WTD - Jupiter Ace plastic rivets Has anyone got a couple of the white plastic rivets which are used to hold the Jupiter Ace case together? They consist of a 4-point clawed rivet of about 5mm long, and a pin which pushes down the centre to open it out. I need five of them ideally - but even two or three would get the case buttoned up, if not perfectly. I've checked the local plastic supplier catalogues and haven't found anything which quite matches up. Cheers, -- Phil. philpem at philpem.me.uk https://www.philpem.me.uk/ Sent from iPad Pro