10 Dec
1998
10 Dec
'98
2:36 p.m.
> The HX20 printer is quite interesting. It's
got 4 print solenoids/pins on
> a little 'shuttle', spaced 5 characters apart in the same horizontal
> line. A motor/scroll cam assembly wobbles this backwards and forwards
> across the paper and moves the paper up one dot line for ever complete
> movement of the shuttle. The HX20 electronics sends appropriately timed
> pulses to the solenoids to put dots on the paper. It is an impact
> printer, of course.
May I ask, why do this when it's probably easier to use 9 vertically
aligned pins like the rest of the civilized dot matrix world? (Except for
engineering chauvinism, that is)
----------------------------------------------------
Max Eskin | kurtkilgor(a)bigfoot.com | AOL: kurtkilgor
10 Dec
10 Dec
3:06 p.m.
Once upon a midnight dreary, Max Eskin had spoken clearly:
Portability (size), power requirements, reliability (remember... this was
one of the first; if not the first commercial laptop ever).
The Epson HX-20 is a very small (never held one, but they look to weigh 5-6
pounds)... complete with mini-printer (prolly 20 chrs wide), computer with
a full-sized keyboard, mini-cassette for data/proggie storage, what looked
to be a 20 char by 4 line LCD and in the case I mentioned earlier, a
speech-pak for voice synthesis.
It's quite doubtful Epson could shoehorn an FX-80 printhead & carriage
reliably in that... and if they could, I doubt you could power it for long.
And yes, this all ran on batteries for prolly a very long time (16-20 hours
on 4 AA batteries in the case of the Tandy 200-100 respectively), depending
on use of the peripherals, and I think it used industry standard batteries
as well.
HTH,
Roger "Merch" Merchberger
> > The HX20 printer is quite interesting.
It's got 4 print solenoids/pins
on
> a little
'shuttle', spaced 5 characters apart in the same horizontal
> line. A motor/scroll cam assembly wobbles this backwards and forwards
> across the paper and moves the paper up one dot line for ever complete
> movement of the shuttle. The HX20 electronics sends appropriately timed
> pulses to the solenoids to put dots on the paper. It is an impact
> printer, of course.
May I ask, why do this when it's probably easier to use 9 vertically
aligned pins like the rest of the civilized dot matrix world? (Except for
engineering chauvinism, that is)
3:36 p.m.
Roger Merchberger wrote:
Portability (size), power requirements, reliability
(remember... this was
one of the first; if not the first commercial laptop ever).
This was a battery-powered printer? In that case, I sit slackjawed in
fascination at the ingenuity of this engineering. I want one!
--------------------------------------
Max Eskin | kurtkilgor(a)bigfoot.com
11 Dec
11 Dec
7:42 a.m.
A non-text attachment was scrubbed...
Name: not available
Type: text
Size: 748 bytes
Desc: not available
Url :
http://www.classiccmp.org/pipermail/cctalk/attachments/19981211/8e89649d/at…
7:37 a.m.
A non-text attachment was scrubbed...
Name: not available
Type: text
Size: 1202 bytes
Desc: not available
Url :
http://www.classiccmp.org/pipermail/cctalk/attachments/19981211/2c31ad61/at…
9361
days inactive
9362
days old
4 comments
3 participants
participants (3)
-
ard＠p850ug1.demon.co.uk -
kurtkilg＠geocities.com -
zmerch＠30below.com