25 Nov
2019
25 Nov
'19
4:39 a.m.
Hi
? Can anybody tell me the dimensions of a Straight-8 Front Panel. -
Just the glass section
Thanks
Rod
--
25 Nov
25 Nov
7:51 a.m.
If no one answers I can measure the panel at the VCF Museum?s straight-8 on Wednesday when
I?m there.
On Nov 25, 2019, at 7:39 AM, Rod Smallwood via cctalk
<cctalk at classiccmp.org> wrote:
Hi
Can anybody tell me the dimensions of a Straight-8 Front Panel. - Just the glass
section
Thanks
Rod
--
1:10 p.m.
On Mon, Nov 25, 2019 at 4:02 PM corey cohen via cctalk
<cctalk at classiccmp.org> wrote:
If no one answers I can measure the panel at the VCF
Museum?s straight-8 on Wednesday when I?m there.
I have the means to give the answer (and I'm likely to be a purchaser
since mine has some paint damage) but I can't get to mine before
December.
Looking forward to hearing the answer.
-ethan
2:56 p.m.
Hi Ethan
Ok .. I now have dimensions and will add you to the list
I have only recently got back to doing panels after a break of a couple
of years.
My wife has not been too well and has been hospitalized on a couple of
occaisions.
However now she is just about fully recovered so I'm back to making panels.
I have stocks of PDP8/e (A and B), PDP8/f and universal /f or /m (unmarked).
I'm redoing the old artwork and looking to do my own screening when the
weather gets better.
Doing silk screen printing in a English winter is not a good idea.
We have had showery rain and temps in the range -1C to +4C for weeks.
It aint going to get better anytime soon.
Even in a heated room the humidity is too high for quick drying.
I plan to have a range of panels made and in stock next spring.
I'm always interested in requirements for panels.
So if you hear of any please let me know.
Rod Smallwood
On 25/11/2019 21:10, Ethan Dicks via cctalk wrote:
On Mon, Nov 25, 2019 at 4:02 PM corey cohen via
cctalk
<cctalk at classiccmp.org> wrote:
--
If no one answers I can measure the panel at the
VCF Museum?s straight-8 on Wednesday when I?m there.
I have the means to give the
answer (and I'm likely to be a purchaser
since mine has some paint damage) but I can't get to mine before
December.
Looking forward to hearing the answer.
-ethan
3:44 p.m.
On Mon, Nov 25, 2019 at 5:56 PM Rod Smallwood via cctalk
<cctalk at classiccmp.org> wrote:
Hi Ethan
Ok .. I now have dimensions and will add you to the list
Cool. Thanks.
I have only recently got back to doing panels after a
break of a couple
of years.
No worries. Good to hear your wife is on the mend.
I'm in no hurry. I won't be doing any restoration work on the
Straight-8s in the next year. My next big project is trying to get
started on my 11/20. It has the plexi, so no worries there. It was
stripped before I rescued it from a dumpster so I have to replace all
the muffin fans and check to see if I have the power paddles or if I
have to have some made. I definitely did not get the PSUs (those and
the fans were kept) and I am likely to use modern equipment rather
than try to source 50-year-old DEC linear PSUs. The target is to get
it working by Spring 2022.
After I get my -8/S up, then I'll probably try to tackle one of the
Straight-8s, but I wanted to get in line for a plexi because the time
to get one is when they are made, not 10 years later.
Cheers,
-ethan
1858
days inactive
1858
days old
4 comments
3 participants
participants (3)
-
coreyvcf＠gmail.com -
ethan.dicks＠gmail.com -
rodsmallwood52＠btinternet.com