On Sat, 2 Mar 2002, Tarsi wrote:
Card 2: Drive Side - 50 pin dual connectors
Emulex Corp (C)1982
ASSY TU0210401 Rev E
T/A Tc0210201-FSJ P.O.1446 3-25-87
An Emulex TC02? I have a Emulex board TU0110401-01 Rev H, and it came
with a piece of paper describing it as a TC01/PE. Megan's wonderful
bible^H^H^H^H^HModule List says:
TC02 Q Emulex Pertec-interface tape drive controller.
Emulates TS11. Early revisions incompatible
with VMS.
TC02 Q Emulex Pertec-interface tape drive controller.
Emulates TS11. Early revisions incompatible
with VMS. Supports 1-4 Cipher F880, CDC 92181,
Kennedy 6809, and Pertec F1000.
The "50 pin dual connectors" are just right for formatted Pertec
interface.
Card 6 - Drive Side - Almost same as Card 2
Emulex Corp, Santa Ana, CA
ASSY SU0210401 REV G S/N 3332
on the biggest chip:
TODASSY SC0210201-CXL
S/N 73815
SUB ASSY 3332P REV G
W/BOOT
Ditronics 0284
WareExpo 5/85
Opposite side
PWB SU0210701 REV B
Using the same pattern as above, an Emulex SC02/CXL? The closest match
from the Module List says:
SC02/C Q Emulex SMD disk controller. Emulates Digital
RK611/RK06/RK07. 22-bit. Supports Fujitsu 2322.
Includes BDV11-compatible line-time clock.
The rest sounds like a bunch of custom stuff which may or may not be
useful.
--
Jeffrey S. Sharp
jss(a)subatomix.com