2 Feb
2002
2 Feb
'02
4:30 a.m.
>On Fri, 1 Feb 2002, Geoff Reed wrote:
> I've dealt with Sunguk many times and
he's a stand up guy, the 1 time
I
> got a bad Dimm from him for my sp[arc ultra he
refunded the $ to me with
no
> problems.
And Doc Opined :-
Yeah, I read through the negatives, and they all had
the same flavor.
Mostly it seems Mr. Sunguk doesn't babysit. I wasn't so worried that I
refrained from buying. I wouldn't try it on most PC's though. Every PC
I've had that took 30-pin SIMMs wanted parity. Was that the norm, or my
luck?
You are right, Sunguk doesn't suffer fools. He is however very good - one
of the positives is from me - I bought 128mb of Sparc5 Ram (that rare-ish
5volt Dimm stuff) from him a few months back and he made an exception and
shipped internationally.
Question is - does my '030 Cube take parity or non-parity.....eek! I used
to know this...
//Rich
Doc
<doc(a)mdrconsult.com> To:
classiccmp(a)classiccmp.org
Sent by: cc:
owner-classiccmp@cla Subject: Re: cheap 16MB 30-pin RAM on
eBay
ssiccmp.org
02/02/2002 02:52
Please respond to
classiccmp
Doc
2 Feb
2 Feb
5:13 a.m.
You are right, Sunguk doesn't suffer fools. He is
however very good - one
of the positives is from me - I bought 128mb of Sparc5 Ram (that rare-ish
5volt Dimm stuff) from him a few months back and he made an exception and
shipped internationally.
Is that the same 5V FPM 168pin DIMM as used in early PowerMac's?
Question is - does my '030 Cube take parity or
non-parity.....eek! I used
to know this...
Here's the FAQ at Peanuts concerning memory:
http://www.peanuts.org/faq-serve/cache/174.html
Jeff
--
Home of the TRS-80 Model 2000 FAQ File
http://www.cchaven.com
http://www.geocities.com/siliconvalley/lakes/6757
6:38 a.m.
At 02:13 PM 2/2/02 -0500, you wrote:
Nope, I had hoped it would be the same, but it isn;'t :( I had a bunch of
old mac ram floating around, and none of it was liked my the sparc 5.....
You are right,
Sunguk doesn't suffer fools. He is however very good - one
of the positives is from me - I bought 128mb of Sparc5 Ram (that rare-ish
5volt Dimm stuff) from him a few months back and he made an exception and
shipped internationally.
Is that the same 5V FPM 168pin DIMM as used in early PowerMac's? 
12:01 p.m.
On Sat, 2 Feb 2002, Geoff Reed wrote:
That's because PowerMac DIMMs are non-parity. The SS5 uses parity memory
(albeit one bit per 32-bit word, for 66-bit--wide DIMMs, instead of the
more usual arrangement of one parity bit per 8-bit byte, for 72-bit--wide
DIMMs).
ok
r.
Is
that the same 5V FPM 168pin DIMM as used in early PowerMac's?
Nope, I had hoped it would be the same, but it isn;'t :( I had a bunch of
old mac ram floating around, and none of it was liked my the sparc 5.....
1:45 p.m.
At 09:01 PM 2/2/02 -0500, you wrote:
That's because PowerMac DIMMs are non-parity. The
SS5 uses parity memory
(albeit one bit per 32-bit word, for 66-bit--wide DIMMs, instead of the
more usual arrangement of one parity bit per 8-bit byte, for 72-bit--wide
DIMMs).
They don't go the other way either, I tried that :( hoping to add some ram
to a powermac 8500 a friend had :(
8360
days inactive
8360
days old
4 comments
4 participants
participants (4)
-
geoffr＠zipcon.net -
jhellige＠earthlink.net -
red＠bears.org -
Richard.Sandwell＠roebry.co.uk