Anyone know how to set Aux port speed on Datamedia DT/80 - test-drb@ccmp.vtda.org

11 Sep 2004

...
  Just acquired a
Datamedia DT/80 (nostalgic value - spent many 100s of
hours in front of one of these during earlier parts of my career). 
What? You worked only a few weeks?  :-) 
Um ... I must have a different definition of the work "many" ... :-))

...
 If it's a good DEC emulation, this might help.

 From the VT102 manual (which had VT100 Advanced Video and printer port 
built in):

"In Setup B, the arrow keys and SHIFT select either the modem [normal 
computer port] or the printer [aux] interface features. When you hold down 
SHIFT, <LEFT ARROW> selects modem features, <RIGHT ARROW> selects printer 
features."

So, in Setup B, <SHIFT><RIGHT ARROW> should select the printer features.

<CTRL><KEYPAD ENTER> toggles AutoPrint (line at at time).
<SHIFT><KEYPAD ENTER> does a print screen.

<KEYPAD ENTER> is supposedly the "Print" key. 
Thanks Ed,

That wasn't quite it, but it was enough of a hint to get me there - all
I had to do was hit SHIFT-6 - this toggles the Aux port instead of the
TX port (I could have sworn I tried that ... but it worked this time).

Also find and fixed a cold solder joint on a connector that was causing
the terminal to be intermittant (It was partially disassembled when I
got it - sombody must have been searching for it before).

Regards,
Dave
-- 
dave04a (at)    Dave Dunfield
dunfield (dot)  Firmware development services & tools: www.dunfield.com
com             Vintage computing equipment collector.
                http://www.parse.com/~ddunfield/museum/index.html