I was told that Don Maslin can help me with boot disks for some old CP/M computers. I need boot disks for the following: Morrow Micro Decision MD 1 Epson QX-10 several different Kaypro models I tried to make a boot disk for the Morrow using 22disk and the 'STDCPM22' file at 'www.retroarchive.org'. 22disk did not have a file format for the Morrow MD 1, so I used the format for the Morrow MD 2. (As far as I have been able to find out, the MD1 had full height floppy disk drives and the MD2 had half-height drives, but they were the same capacity). When I tried to use the floppy to boot the computer, it would spin for about 15 seconds, then the computer would reboot. I was making the boot disk on a computer which had a 360K floppy drive. Thanks! xtguy