28 Oct
2003
28 Oct
'03
11:30 p.m.
I'm looking for a SCSI cable. I need one that is a HD68 with screws to
Centronics 50 with the upper 9 bytes terminated. I haven't been able to
find one locally in Dallas. It is for a (OT) Octane to Sgi SCSI-1 CD-ROM
--
http://webpages.charter.net/jrice54/classiccomp2.html
28 Oct
28 Oct
11:53 p.m.
Contact the people at http://www.mocconsulting.com/. They're local to me,
but they ship. They're Good People (tm).
Peace... Sridhar
On Wed, 29 Oct 2003, James Rice wrote:
I'm looking for a SCSI cable. I need one that is
a HD68 with screws to
Centronics 50 with the upper 9 bytes terminated. I haven't been able to
find one locally in Dallas. It is for a (OT) Octane to Sgi SCSI-1 CD-ROM
--
http://webpages.charter.net/jrice54/classiccomp2.html
29 Oct
29 Oct
12:14 a.m.
Try Cyberguys, http://www.cyberguys.com/
Pretty good, cheap SCSI cables. They have all kinds of neat, reasonably
priced stuff, accessory-wise at least.
----- Original Message -----
From: <vance(a)neurotica.com>
To: "James Rice" <jrice54(a)charter.net>
Cc: <cctalk(a)classiccmp.org>
Sent: Wednesday, October 29, 2003 8:53 AM
Subject: Re: WTB: SCSI cable (OT)
Contact the people at http://www.mocconsulting.com/. They're local to me,
but they ship. They're Good People (tm).
Peace... Sridhar
On Wed, 29 Oct 2003, James Rice wrote:
> I'm looking for a SCSI cable. I need one that is a HD68 with screws to
> Centronics 50 with the upper 9 bytes terminated. I haven't been able to
> find one locally in Dallas. It is for a (OT) Octane to Sgi SCSI-1
CD-ROM
6:05 a.m.
SCSI-3 to SCSI-1 cable, should be available. I found one in Cedar Rapids
IA couple years ago. You'll have to figure out how to terminate the lines
though.
Gary Hildebrand
St. Joseph, MO
I'm looking for a SCSI cable. I need one that is
a HD68 with screws to
Centronics 50 with the upper 9 bytes terminated. I haven't been able to
find one locally in Dallas. It is for a (OT) Octane to Sgi SCSI-1 CD-ROM
--
http://webpages.charter.net/jrice54/classiccomp2.html
7:16 a.m.
On Wed, 29 Oct 2003, James Rice wrote:
I'm looking for a SCSI cable. I need one that is
a HD68 with screws to
Centronics 50 with the upper 9 bytes terminated. I haven't been able to
find one locally in Dallas. It is for a (OT) Octane to Sgi SCSI-1
CD-ROM
Your best bet might be to use a high byte terminator/adapter and a
standard cable.
Paralan [http://www.paralan.com/] used to make such adapters, but I don't
see them listed now. Overall their products are a bit pricey, but are of
extremely high quality.
I'd suggest you have a look at the section of the comp.periphs.scsi FAQ
that addresses these adapters. It include a list of vendors that can
supply these adapters/cables. The section is "Can I connect a narrow
device to my WIDE SCSI host adapter?" which can be found here:
http://fieldhome.net:9080/scsi_faq/scsifaq.html#_Hlk410547920
There is also a warning near the end of the section about mis-wired
adapters and TERMPWR that you should be aware of. I've come across some of
those mis-wired adapters that are mentioned there.
-Toth
7724
days inactive
7724
days old
4 comments
5 participants
participants (5)
-
ghldbrd＠ccp.com -
jbmcb＠hotmail.com -
jrice54＠charter.net -
tothwolf＠concentric.net -
vance＠neurotica.com