25 Apr
2000
25 Apr
'00
7:21 a.m.
I have a couple floppy disk controllers from a device
that contained an
integrated LSI-11 cpu and a few other boards.
The floppy controller is from Charles River Data Systems (C) 1978. On
the connector, one of them has FC-202 / 1613 on it, the other has
FC-202 / 1703. The floppy disks that were connected to it were
single sided shugarts (801-2 if i recall correctly).
Yep, what you have there is one of the early RX02 clones.
I'm curious if these can handle DSDD, and anything
else that anyone
knows about it.
No, it doesn't do DSDD. I've got a manual for the CRDS board here somewhere...
If you're really interested in DSDD "RX03" controllers, the place to start
your research is Chester Wilson's DYCM handler, which claims to support
all the RX03 variants that exist in the wild. See
http://metalab.unc.edu/pub/academic/computer-science/history/pdp-11/
go into "rt-11", then "misc", then "ducmv5". Read dyc.doc
(which is really
a text file, not a Microsoft Word file...)
Also, is their a web site with information on pdp-11
boards, similar
to the PDP8 omnibus lists and such that are available? i'd like to
be able to look up what should be common boards, such as LSI-11
cpus, 32K 18 bit MOS memory boards, various serial and parallel
interface cards, etc.
The "Field Guide to Q-Bus and Unibus Modules" is what you want, and
versions have been floating around the net for years. It does very well
with DEC-numbered modules, not so well with third-party boards (although
they are admittedly a tough lot because they don't have a distinct series
of identifying numbers!)
You can find versions of it in many places, including the "hardware" page
at
http://metalab.unc.edu/pub/academic/computer-science/history/pdp-11/
and Megan's revisions at
http://world.std.com/~mbg/
--
Tim Shoppa Email: shoppa(a)trailing-edge.com
Trailing Edge Technology WWW: http://www.trailing-edge.com/
7328 Bradley Blvd Voice: 301-767-5917
Bethesda, MD, USA 20817 Fax: 301-767-5927
25 Apr
25 Apr
8 a.m.
New subject: Apollo Workstation spotted in Ottawa
Hello all,
I found a full working Apollo workstation in Ottawa. If there is any
interest, I will check the model, etc...
Frederic Charpentier
-----Original Message-----
From: owner-classiccmp(a)classiccmp.org
[mailto:owner-classiccmp@classiccmp.org]On Behalf Of
CLASSICCMP(a)trailing-edge.com
Sent: Tuesday, April 25, 2000 8:21 AM
To: classiccmp(a)classiccmp.org
Subject: RE: Identify this LSI-11 floppy controller
I have a couple floppy disk controllers from a device
that contained an
integrated LSI-11 cpu and a few other boards.
The floppy controller is from Charles River Data Systems (C) 1978. On
the connector, one of them has FC-202 / 1613 on it, the other has
FC-202 / 1703. The floppy disks that were connected to it were
single sided shugarts (801-2 if i recall correctly).
Yep, what you have there is one of the early RX02 clones.
I'm curious if these can handle DSDD, and anything
else that anyone
knows about it.
No, it doesn't do DSDD. I've got a manual for the CRDS board here
somewhere...
If you're really interested in DSDD "RX03" controllers, the place to start
your research is Chester Wilson's DYCM handler, which claims to support
all the RX03 variants that exist in the wild. See
http://metalab.unc.edu/pub/academic/computer-science/history/pdp-11/
go into "rt-11", then "misc", then "ducmv5". Read dyc.doc
(which is really
a text file, not a Microsoft Word file...)
Also, is their a web site with information on pdp-11
boards, similar
to the PDP8 omnibus lists and such that are available? i'd like to
be able to look up what should be common boards, such as LSI-11
cpus, 32K 18 bit MOS memory boards, various serial and parallel
interface cards, etc.
The "Field Guide to Q-Bus and Unibus Modules" is what you want, and
versions have been floating around the net for years. It does very well
with DEC-numbered modules, not so well with third-party boards (although
they are admittedly a tough lot because they don't have a distinct series
of identifying numbers!)
You can find versions of it in many places, including the "hardware" page
at
http://metalab.unc.edu/pub/academic/computer-science/history/pdp-11/
and Megan's revisions at
http://world.std.com/~mbg/
--
Tim Shoppa Email: shoppa(a)trailing-edge.com
Trailing Edge Technology WWW: http://www.trailing-edge.com/
7328 Bradley Blvd Voice: 301-767-5917
Bethesda, MD, USA 20817 Fax: 301-767-5927
9013
days inactive
9013
days old
1 comments
2 participants
participants (2)
-
charp＠bitflash.com -
CLASSICCMP＠trailing-edge.com