I can't it's in the way. Space and all are the reasons.
You can get the pin out for both ends from the manuals and the prints.
If you get it wrong things just don't work but no breakage.
On 11/22/19 3:42 PM, Henk Gooijen wrote:
?
?
*Van: *allison via cctech <mailto:cctech at classiccmp.org>
*Verzonden: *vrijdag 22 november 2019 20:01
*Aan: *cctech at
classiccmp.org <mailto:cctech at classiccmp.org>
*Onderwerp: *several items for sale and a note.
?
Now stuff for sale:
The rules are, none for free, make a reasonable offer.? PICKUP only
eastern MA in a reasonable amount of time.? I WILL NOT PACK OR SHIP,
too heavy, damage too likely.? Make offers offline, anything no
interest will be disposed of.
First item:
? Vt180, complete sans wart box, operating, and with second set of RX180
? drives.? I will not break this up. I have some disks for it as well.
? Terminal box is 8 or better and not too yellow.
Allison
?
?
I hope the buyer (or maybe you Allison?) will take the time to beep
the floppy disk drive interface cable.
The floppy drive side has a DB-25 connector, the VT180 side has a
DC-37 connector. Not much to find about it on the internet,
See
www.pdp-11.nl/vt180/vt180-info.html
<http://www.pdp-11.nl/vt180/vt180-info.html> ???I would love to get
confirmation that the home-made cable is correct ?
when I'm done with them
?
Thanks,
Henk
?