Does anyone know what this is or want it? It looks somewhat collectable... I'm asking $25 for it, that's how much it'll cost me for the switches and LEDs if I build my own frontpanel instead of re-use this one's. Here's a description, pictures to appear soon on http://purdueriots.com/imgs/ called bie*.jpg It's a 6800 based system that I picked up at Purdue Salvage for a couple $$. It has 3 IO cards each with a 6821 on it, a MPU card with a 6800, a ROM card, a front-panel card and some other card with (i believe) RAM of some sort on it (chips are Intel P5101L's 22pin DIPs). Front panel has 24 toggle switches w/LEDs (persumably for the IO), a 6digit 7seg display labeled TIME, 7seg labeled FAULT and a pair of 7seg's labeled STEP. On the right, a 2x6 matrix of pushbuttons labelled 0-9 and a pair labeled "S". Next to that, a 2x6 matrix of PBs with LEDs next to them, labeled: STEP BRANCH STEP NO. PROG. START INST. TIME ABORT MASK OUTPUT ABORT ON/OFF INPUT MASK ABORT STEP NO. INPUT ON/OFF CLEAR STEP Along the bottom, there's a row of switches, left to rigth: POWER: Red push-on push-off square switch AUTO/MANUAL: SPST keyswitch EXAM LOAD/RUN: SPST keyswitch PROGRAM: Set of four 'interlocked' buttons (only one is set at a time) 1-4 START: momentary PB RUN, HOLD: interlocked PB's JOG: momentary PB RESET: FAULT, SYST: momentary PB, ALARM: push-on/push-off ABORT: momentary PB The case is rackmount, about 5U or 6U. On the back: 50pin "Amphenol" scsi-style connector. Connected to three IO cards. Power inlet, outlet, fuse SONALERT beeper.