5 Jun
2018
5 Jun
'18
3:30 p.m.
Jon Elson
How/where should I submit this?
This is now available through here:
http://gunkies.org/wiki/Term-Mite_ST_Smart_Terminal
I put in a little infrastructure around it (articles on the Term-Mite, NS405,
etc), using info I dug up online.
Noel
5 Jun
5 Jun
8:15 p.m.
On Tue, Jun 5, 2018 at 1:30 PM, Noel Chiappa via cctalk <
cctalk at classiccmp.org> wrote:
This is now available through here:
http://gunkies.org/wiki/Term-Mite_ST_Smart_Terminal
Thanks!
If someone dumps the ROM of the Zentec ADM3 Retrofit, I'll try my hand at
reverse-engineering the code.
9:38 p.m.
On 06/05/2018 07:15 PM, Eric Smith via cctalk wrote:
On Tue, Jun 5, 2018 at 1:30 PM, Noel Chiappa via
cctalk <
cctalk at classiccmp.org> wrote:
I wrote a disassembler for the NS405/NS455 in Pascal on my
CP/M system, in 1985.
If this code would be of any use, I can let you have it.
I'm guessing this was written for the UCSD Pascal system as
run under CP/M. I have no idea how easy it would be to get
it running on a modern Pascal compiler. I have had really
good luck bringing up some old Pascal programs from Borland
Turbo pascal and VAX Pascal with the Linux FPC (Free Pascal
Compiler).
I also have a cross-assembler for the NS405/455 written in
Pascal.
Jon
This is now available through here:
http://gunkies.org/wiki/Term-Mite_ST_Smart_Terminal
Thanks!
If someone dumps the ROM of the Zentec ADM3 Retrofit, I'll try my hand at
reverse-engineering the code.
6 Jun
6 Jun
1:52 p.m.
On Tue, Jun 5, 2018 at 7:38 PM, Jon Elson <elson at pico-systems.com> wrote:
I wrote a disassembler for the NS405/NS455 in Pascal
on my CP/M system, in
1985.
If this code would be of any use, I can let you have it. I'm guessing
this was written for the UCSD Pascal system as run under CP/M. I have no
idea how easy it would be to get it running on a modern Pascal compiler. I
have had really good luck bringing up some old Pascal programs from Borland
Turbo pascal and VAX Pascal with the Linux FPC (Free Pascal Compiler).
I also have a cross-assembler for the NS405/455 written in Pascal.
Sure, if you've got them handy, I'll try compiling them with FPC. Are you
willing to release them as open source?
Do you have any actual NS405/NS455 code that would be of interest?
2:42 p.m.
On Wed, Jun 6, 2018, 12:52 Eric Smith via cctalk <cctalk at classiccmp.org wrote:
Sure, if you've got them handy, I'll try
compiling them with FPC. Are you
willing to release them as open source?
Do you have any actual NS405/NS455 code that would be of interest?
I have this development board with an NS405 on it. Checked through my docs
and don't seem to have anything for it. Would dumping the EPROM be of
interest?
http://imgur.com/a/zYJvN5B
Thanks,
Kyle
2:50 p.m.
On Wed, Jun 6, 2018 at 12:42 PM, Kyle Owen via cctalk <cctalk at classiccmp.org
wrote:
I have this development board with an NS405 on it.
Checked through my docs
and don't seem to have anything for it. Would dumping the EPROM be of
interest?
From the hand-written label on the EPROM, I suspect
that it's not the
original code the development board shipped with, but sure, it
would still
be interesting to look at the code.
2242
days inactive
2243
days old
5 comments
4 participants
participants (4)
-
elson＠pico-systems.com -
jnc＠mercury.lcs.mit.edu -
kylevowen＠gmail.com -
spacewar＠gmail.com