6 Sep
2015
6 Sep
'15
3:59 a.m.
From: Holm Tiffe
Sorry, I couldn't find a mailing about Schematics
for the KDJ11-AA,
http://www.classiccmp.org/pipermail/cctalk/2015-September/011849.html
I've read that you got some documentation and want
to scan it, 600dpi
with some TIFF compression or so.. that's all.
Well, now I'm really confused, because AFAIK the message that talked about
the 600dpi and TIFF is the same one that thas the URL for the FMPS. So I
don't understand how you don't have them. Oh well.
No, I'm not reading every singe mailing from that
list.
I don't either - there's often too much. But I do read everything that looks
like it could be DEC-related, and most of the other stuff too (it's kind of
fun to read about the really old machines, etc).
Noel
6 Sep
6 Sep
8:53 a.m.
Noel Chiappa wrote:
..no clue, maybe I had tomatoes on the eyes (german saying).
Anyway, thanks for the schematics, I have the board running again. The fix
was simple, the xtal was bad.
The was happily tickering around with an 18Mhz Xtal (found this one first in
the box) but I now have soldered in a 15.45 Mhz, no 15.206 handy..
Next to try this motorola memory board..
From: Holm
Tiffe
Sorry, I couldn't find a mailing about
Schematics for the KDJ11-AA,
http://www.classiccmp.org/pipermail/cctalk/2015-September/011849.html
I've read that you got some documentation and
want to scan it, 600dpi
with some TIFF compression or so.. that's all.
Well, now I'm really confused, because AFAIK the message that talked about
the 600dpi and TIFF is the same one that thas the URL for the FMPS. So I
don't understand how you don't have them. Oh well.
> No, I'm not reading every singe mailing from that list.
I don't either - there's often too much. But I do read everything that looks
like it could be DEC-related, and most of the other stuff too (it's kind of
fun to read about the really old machines, etc).
Noel
...that's somthing like that what I wrote as pm to tony today.
Love that restoration reports with pictures and so on.. but
such machines simply doesn't exist here. Here, that is the former east
germany (from behind the iron curtain) and the machines here where either
robotron (east german), russian, tzschech or hungarian. The bigger mostly
PDP11 compatibles (clones are other things!) or IBM compatible (ESER
Mainfraimes). There where old KRS4x00 Series that has a Honeywell
compatible Instruction set with Core Mem.
I think I posted the link in the past, but that is the CPU of an russian
11/03 or 11/23 w/o MMU, an Elektronika 60 with an RX02 alike that I have:
http://www.tiffe.de/Robotron/PDP-VAX/E60/CPU-oben.jpg
4KW purple russian 2107 on the left..
That's how the terminal looks:
http://www.tiffe.de/Robotron/PDP-VAX/E60/DSCF0065.JPG
The complete machine:
http://www.tiffe.de/Robotron/PDP-VAX/E60/DSCF0066.JPG
other casing:
http://www.tiffe.de/Robotron/PDP-VAX/E60/DSCF0067.JPG
(that bluish box has nothing todo with the computer)
..but I only have the Card Cage, the Floppy and the Terminal here.
Have the Tape too, but must made a cable first.
Regards,
Holm
--
Technik Service u. Handel Tiffe, www.tsht.de, Holm Tiffe,
Freiberger Stra?e 42, 09600 Obersch?na, USt-Id: DE253710583
www.tsht.de, info at tsht.de, Fax +49 3731 74200, Mobil: 0172 8790 741
3347
days inactive
3347
days old
1 comments
2 participants
participants (2)
-
holm＠freibergnet.de -
jnc＠mercury.lcs.mit.edu