14 Aug
2016
14 Aug
'16
3:55 a.m.
I have a Rainbow 100+ with a working hard disk. I want to image the disk
before it fails and then emulate the Rainbow. The disk is an RD51 and
appears to have 4 partitions on it.
For imaging my first thought is to put the disk into a MicroVAX II, net boot
the MicroVAX into VMS and do a BACKUP/PHYSICAL, copying the image to a SIMH
tap file. There shouldn't be any issues with this I assume?
Second, I would like to find an emulator for the Rainbow. I did a quick
search of the web and it seems like MESS/MAME may be the only option. I have
never used MESS/MAME, has anyone ever emulated the Rainbow successfully with
this software?
Regards
Rob
14 Aug
14 Aug
4:58 a.m.
I have a Rainbow 100+ with a working hard disk. I want to image the disk
before it fails and then emulate the Rainbow. The disk is an RD51 and
appears to have 4 partitions on it.
For imaging my first thought is to put the disk into a MicroVAX II, net boot
the MicroVAX into VMS and do a BACKUP/PHYSICAL, copying the image to a SIMH
tap file. There shouldn't be any issues with this I assume?
I believe there are tools for dealing with BACKUP/IMAGE savesets on other
platforms but I'm not sure whether they cope with savesets from BACKUP/PHYSICAL.
You might have to restore the saveset using VMS running on SIMH onto an RD51
emulated by SIMH, assuming such a thing exists. From there, it should be
easier to change it into an image suitable for another emulator if necessary.
Regards,
Peter Coghlan.
5:22 a.m.
-----Original Message-----
From: cctalk [mailto:cctalk-bounces at classiccmp.org] On Behalf Of Rob
Jarratt
Sent: 14 August 2016 11:55
To: General Discussion: On-Topic and Off-Topic Posts
<cctalk at classiccmp.org>
Subject: Imaging and Emulating Rainbow
I have a Rainbow 100+ with a working hard disk. I want to image the disk
before it fails and then emulate the Rainbow. The disk is an RD51 and
appears to have 4 partitions on it.
For imaging my first thought is to put the disk into a MicroVAX II, net
boot the
MicroVAX into VMS and do a BACKUP/PHYSICAL, copying
the image to a
SIMH tap file. There shouldn't be any issues with this I assume?
Oh dear. VMS would not let me MOUNT/FOREIGN, it said:
%MOUNT-F-FORMAT, invalid media format
So I couldn't mount it to do the BACKUP/PHYSICAL.
What options do I have to image this disk?
Regards
Rob
5:33 a.m.
For imaging my first thought is to put the disk into a MicroVAX II, net boot the
MicroVAX into VMS and do a BACKUP/PHYSICAL, copying the image to a
SIMH tap file. There shouldn't be any issues with this I assume?
Oh dear. VMS would not let me MOUNT/FOREIGN, it said:
%MOUNT-F-FORMAT, invalid media format
So I couldn't mount it to do the BACKUP/PHYSICAL.
What options do I have to image this disk?
10:35 a.m.
Oh dear. VMS
would not let me MOUNT/FOREIGN, it said:
%MOUNT-F-FORMAT, invalid media format
So I couldn't mount it to do the BACKUP/PHYSICAL.
What options do I have to image this disk?
It appears that the format used by the Rainbow disk controller is not
compatible with the format used by the controller in the MVII :-(
It looks likely you will have to run something on the Rainbow itself to do unless it is possible to extract the disk controller
from the Rainbow and
put it
into something else that can cope with it.
I should have thought of that. I think my options are either on-box, or
David Gesswein's MFM reader/emulator. My inclination is the latter because I
actually bought the original board but then never actually built it because
at the time I was enjoying the challenge of attempting to create my own such
reader/emulator using an FPGA. My project faltered and I never found the
energy to build David's, but I think I will now.
Regards
Rob
10:43 a.m.
On Sun, Aug 14, 2016 at 11:35 AM, Rob Jarratt
<robert.jarratt at ntlworld.com> wrote:
this
The format used by the Rainbow and the MVII are the same. The low-level, bits
on the disk format. However, the Rainbow and the MVII use radically
different meta
data to describe the disks (both in terms of how tracks are
constructed and some other
bits). The source to the Rainbow hard disk partitioning and formatting
utility is
available in the various Rainbow archives. You'd need to start there.
It has extensive
documentation about all the details of how things are put down onto
the drive to 'format'
it.
I've successfully read, but not written rainbow hard drives with an
ancient version
of FreeBSD that supported the ST-504 interface and the WD8002
controller. FreeBSD
killed that code a long time ago, but I think it may still be alive in
Linux. It's been so
long I don't recall if it was a simple dd, or if I had to hack
something together to read
the raw bytes off each track... Looking just now, I can't find the
images I created, but
I still have my Rainbow 100B (upgraded to a 100+) in the basement.
Warner
Oh dear.
VMS would not let me MOUNT/FOREIGN, it said:
%MOUNT-F-FORMAT, invalid media format
So I couldn't mount it to do the BACKUP/PHYSICAL.
What options do I have to image this disk?
It appears that the format used by the Rainbow disk controller is not
compatible with the format used by the controller in the MVII :-(
It looks likely you will have to run something on the Rainbow itself to do unless it is possible to extract the disk
controller from the Rainbow and
put it
into something else that can cope with it.
I should have thought of that. I think my options are either on-box, or
David Gesswein's MFM reader/emulator. My inclination is the latter because I
actually bought the original board but then never actually built it because
at the time I was enjoying the challenge of attempting to create my own such
reader/emulator using an FPGA. My project faltered and I never found the
energy to build David's, but I think I will now. 
5:40 a.m.
Linux, using dd?
Enviado do meu Tele-Movel
Em 14/08/2016 09:22, "Rob Jarratt" <robert.jarratt at ntlworld.com>
escreveu:
-----Original Message-----
From: cctalk [mailto:cctalk-bounces at classiccmp.org] On Behalf Of Rob
Jarratt
Sent: 14 August 2016 11:55
To: General Discussion: On-Topic and Off-Topic Posts
<cctalk at classiccmp.org>
Subject: Imaging and Emulating Rainbow
I have a Rainbow 100+ with a working hard disk. I want to image the disk
before it fails and then emulate the Rainbow. The disk is an RD51 and
appears to have 4 partitions on it.
For imaging my first thought is to put the disk into a MicroVAX II, net
boot the
MicroVAX into VMS and do a BACKUP/PHYSICAL,
copying the image to a
SIMH tap file. There shouldn't be any issues with this I assume?
Oh dear. VMS would not let me MOUNT/FOREIGN, it said:
%MOUNT-F-FORMAT, invalid media format
So I couldn't mount it to do the BACKUP/PHYSICAL.
What options do I have to image this disk?
Regards
Rob
5:45 a.m.
-----Original Message-----
From: cctalk [mailto:cctalk-bounces at classiccmp.org] On Behalf Of Alexandre
Souza
Sent: 14 August 2016 13:40
To: General Discussion: On-Topic and Off-Topic Posts
<cctalk at classiccmp.org>; rob at jarratt.me.uk
Subject: RE: Imaging and Emulating Rainbow
Linux, using dd?
This did cross my mind. I suppose I am not sure how to get Linux onto the machine. With
VMS I know I can netboot, I don't have enough Unix knowledge to netboot a MicroVAX II.
I will try to research how to do it, but if anyone has any nice pointers that would be
great.
Regards
Rob
5:51 a.m.
Linux, using dd?
This did cross my mind. I suppose I am not sure how to get Linux onto the
machine. With VMS I know I can netboot, I don't have enough Unix knowledge
to netboot a MicroVAX II. I will try to research how to do it, but if anyone
has any nice pointers that would be great.
5:41 a.m.
Looking at
http://www.vaxarchive.org/hardware/mfm/index.html
the RD51 is a 10Mb Seagate ST412 disk with a DEC label on it. I think you
should therefore be able to image it with one of these:-
http://www.vaxarchive.org/hardware/mfm/index.html
Now I have two bare boards for these obtained at great expense because of
the Royal Mail charging me ?8.00 (about $10.00) for collecting the VAT which
just about doubled the cost.
I also have a Beagle Board which is needed to run the thing, but I haven?t
obtained any of the other parts needed to build them, and I am not going to
get one built before (insert movable deadline)...
... perhaps we could get the bits an build one at Dec Legacy.. Assuming I
get there....
Dave Wade
EA7 KAE (& G4UGM)
-----Original Message-----
From: cctalk [mailto:cctalk-bounces at classiccmp.org] On Behalf Of Rob
Jarratt
Sent: 14 August 2016 13:23
To: rob at jarratt.me.uk; 'General Discussion: On-Topic and Off-Topic Posts'
<cctalk at classiccmp.org>
Subject: RE: Imaging and Emulating Rainbow
-----Original Message-----
From: cctalk [mailto:cctalk-bounces at classiccmp.org] On Behalf Of Rob
Jarratt
Sent: 14 August 2016 11:55
To: General Discussion: On-Topic and Off-Topic Posts
<cctalk at classiccmp.org>
Subject: Imaging and Emulating Rainbow
I have a Rainbow 100+ with a working hard disk. I want to image the
disk before it fails and then emulate the Rainbow. The disk is an RD51
and appears to have 4 partitions on it.
For imaging my first thought is to put the disk into a MicroVAX II,
net
boot the
MicroVAX into VMS and do a BACKUP/PHYSICAL,
copying the image to a
SIMH tap file. There shouldn't be any issues with this I assume?
Oh dear. VMS would not let me MOUNT/FOREIGN, it said:
%MOUNT-F-FORMAT, invalid media format
So I couldn't mount it to do the BACKUP/PHYSICAL.
What options do I have to image this disk?
Regards
Rob
7:18 a.m.
-----Original Message-----
From: Dave Wade [mailto:dave.g4ugm at gmail.com]
Sent: 14 August 2016 13:42
To: rob at jarratt.me.uk; 'General Discussion: On-Topic and Off-Topic Posts'
<cctalk at classiccmp.org>
Subject: RE: Imaging and Emulating Rainbow
Looking at
http://www.vaxarchive.org/hardware/mfm/index.html
the RD51 is a 10Mb Seagate ST412 disk with a DEC label on it. I think you
should therefore be able to image it with one of these:-
http://www.vaxarchive.org/hardware/mfm/index.html
Dave,
That second link is the same as the first one, did you intend a different
link?
Regards
Rob
8:59 a.m.
If it's running MS-DOS, you should be able to find/write something to do a raw image
dump out the serial port.
That reminds me, I need to image some Rainbow floppies I have.
I would think someone would have already written this in the MS-DOS world.
On 8/14/16 8:54 AM, Al Kossow wrote:
On 8/14/16 3:55 AM, Rob Jarratt wrote:
I have a Rainbow 100+ with a working hard disk. I
want to image the disk
before it fails and then emulate the Rainbow. The disk is an RD51 and
appears to have 4 partitions on it.
MAME supports it. It was a bear to get working correctly.
10:44 a.m.
On 08/14/2016 08:59 AM, Al Kossow wrote:
If it's running MS-DOS, you should be able to
find/write something to
do a raw image dump out the serial port.
That reminds me, I need to image some Rainbow floppies I have.
I would think someone would have already written this in the MS-DOS
world.
They have. Back in 1987, I wrote something for the PC called "RAINDOS"
for Rainbow floppies. I'm sure it's on SIMTEL20.
There are various similarly ancient hard disk backup utilities that use
MSDOS Int 23H/24H for imaging hard drives. They'll work fine on the
Rainbow, IIRC.
--Chuck
10:45 a.m.
I've read Rainbow disks with both Linux and FreeBSD's floppy drivers. However,
the track layout is 'weird' and I never hacked together anything to cope so that
mount and friends would be able to read the disks.
There was a raindrive.sys, iirc, that did this well enough for DOS to access the
files, but I can't find any copies of it now.
Warner
On Sun, Aug 14, 2016 at 9:59 AM, Al Kossow <aek at bitsavers.org> wrote:
If it's running MS-DOS, you should be able to
find/write something to do a raw image
dump out the serial port.
That reminds me, I need to image some Rainbow floppies I have.
I would think someone would have already written this in the MS-DOS world.
On 8/14/16 8:54 AM, Al Kossow wrote:
On 8/14/16 3:55 AM, Rob Jarratt wrote:
I have a Rainbow 100+ with a working hard disk. I
want to image the disk
before it fails and then emulate the Rainbow. The disk is an RD51 and
appears to have 4 partitions on it.
MAME supports it. It was a bear to get working correctly.
15 Aug
15 Aug
11:09 a.m.
On Sun, 14 Aug 2016 11:45:23 -0600, Warner Losh <imp at bsdimp.com> wrote:
[...]
There was a raindrive.sys, iirc, that did this well
enough for DOS to
access the files, but I can't find any copies of it now.
The SimtelNet CDs had a RainDOS driver written by Sydex; the last version I
can find is 1.21 (although the documentation inside says it's 1.22), e.g. in
http://cd.textfiles.com/simtel/stmsdos9709/disk1/DISC1/DISKUTIL/RAIND121.ZIP
Regards,
Stephen
11:38 a.m.
On 08/15/2016 11:09 AM, Stephen Kitt wrote:
On Sun, 14 Aug 2016 11:45:23 -0600, Warner Losh
<imp at bsdimp.com>
wrote: [...]
Yup, I wrote that one. There may be a later version--I don't recall.
If anyone's interested, I can check.
Ancient history for me.
--Chuck
There was a raindrive.sys, iirc, that did this
well enough for DOS
to access the files, but I can't find any copies of it now.
The SimtelNet CDs had a RainDOS driver written by Sydex; the last
version I can find is 1.21 (although the documentation inside says
it's 1.22), e.g. in
http://cd.textfiles.com/simtel/stmsdos9709/disk1/DISC1/DISKUTIL/RAIND121.ZIP 
14 Aug
14 Aug
3:03 p.m.
On 08/14/2016 10:59 AM, Al Kossow wrote:
If it's running MS-DOS, you should be able to
find/write something to do a raw image
dump out the serial port.
That reminds me, I need to image some Rainbow floppies I have.
I would think someone would have already written this in the MS-DOS world.
Indeed. I got as far as hacking something to sector-dump chunks of data
from the hard disk to floppy, then sneakernetting that
across to a modern
PC for reassembly (~20MB is a little painful, but not too bad,
writing to
one disk while reading from another).
My initial intention was to polish the code a bit and add serial support,
but that was immediately followed by the thought of "surely someone else
has done this already?", at which point I'd done what I immediately needed
to do anyway, and so never did anything more with the code.
If anyone knows of an x86 DOS util which does sector dumps over rs232, I'd
be interested to hear about it (particularly if the transfer protocol is
something supported by any old comms program). I do have various '80s-era
PCs with ST506/412-type drives which could benefit from a backup.
cheers
Jules
5:10 p.m.
Jules:
If you don't mind doing a little hardware / software:
I've been using a module from FTDI that 'talks' TTL level RS232 at
baud rate up to / past? 115Kbaud, and 'talks to' USB thumb drives.
Go to digikey / etc, and look at the 'VDRIVE3' from FTDI.
It does all the grunt work in handling file creation and reading.
Karl Wacker
----- Original Message -----
From: "Jules Richardson" <jules.richardson99 at gmail.com>
To: <General at classiccmp.org>; "Discussion at classiccmp.org:On-Topic and
Off-Topic Posts" <cctalk at classiccmp.org>
Sent: Sunday, August 14, 2016 6:03 PM
Subject: Re: Imaging and Emulating Rainbow
On 08/14/2016 10:59 AM, Al Kossow wrote:
If it's running MS-DOS, you should be able to
find/write something to do
a raw image
dump out the serial port.
That reminds me, I need to image some Rainbow floppies I have.
I would think someone would have already written this in the MS-DOS
world.
Indeed. I got as far as hacking something to sector-dump chunks of data
from the hard disk to floppy, then sneakernetting that across to a modern
PC for reassembly (~20MB is a little painful, but not too bad, writing to
one disk while reading from another).
My initial intention was to polish the code a bit and add serial support,
but that was immediately followed by the thought of "surely someone else
has done this already?", at which point I'd done what I immediately needed
to do anyway, and so never did anything more with the code.
If anyone knows of an x86 DOS util which does sector dumps over rs232, I'd
be interested to hear about it (particularly if the transfer protocol is
something supported by any old comms program). I do have various '80s-era
PCs with ST506/412-type drives which could benefit from a backup.
cheers
Jules
9:27 a.m.
Am 14.08.2016 um 12:55 schrieb Rob Jarratt:
I have a Rainbow 100+ with a working hard disk. I want
to image the disk
before it fails and then emulate the Rainbow. The disk is an RD51 and
appears to have 4 partitions on it.
Regards
Rob
I can't help but you make me remembering some files for the rainbow I
got from a nice guy in australia whos's playing mostly with his os/2
stuff ;-)
http://oldcomputers.dyndns.org/public/pub/mirror/os2site/sw/dec/rainbow/ind…
for my own CP/M systems I got a MFM Hard Disk Reader/Emulator from
http://www.pdp8.net/mfm/mfm.shtml.
It isn't useful for your part but with it I managed to replace my
MFM-Drive and store it in a saver place.
Australia
10:38 a.m.
Thanks for that link with the files, that looks really useful. Is there a
zip of the whole lot anywhere or an FTP site, to make it easier to download?
Regards
Rob
From: fritz_chwolka at web.de [mailto:fritz_chwolka at t-online.de]
Sent: 14 August 2016 17:27
To: rob at jarratt.me.uk; General Discussion: On-Topic and Off-Topic Posts
<cctalk at classiccmp.org>
Subject: Re: Imaging and Emulating Rainbow
Am 14.08.2016 um 12:55 schrieb Rob Jarratt:
I have a Rainbow 100+ with a working hard disk. I want to image the disk
before it fails and then emulate the Rainbow. The disk is an RD51 and
appears to have 4 partitions on it.
Regards
Rob
I can't help but you make me remembering some files for the rainbow I got
from a nice guy in australia whos's playing mostly
with his os/2 stuff ;-)
http://oldcomputers.dyndns.org/public/pub/mirror/os2site/sw/dec/rainbow/inde
x.html
for my own CP/M systems I got a MFM Hard Disk Reader/Emulator from
http://www.pdp8.net/mfm/mfm.shtml.
It isn't useful for your part but with it I managed to replace my MFM-Drive
and store it in a saver place.
Australia
10:57 a.m.
Am 14.08.2016 um 19:38 schrieb Rob Jarratt:
Thanks for that link with the files, that looks really
useful. Is there a
zip of the whole lot anywhere or an FTP site, to make it easier to download?
Regards
Rob
From: fritz_chwolka at web.de [mailto:fritz_chwolka at t-online.de]
Sent: 14 August 2016 17:27
To: rob at jarratt.me.uk; General Discussion: On-Topic and Off-Topic Posts
<cctalk at classiccmp.org>
Subject: Re: Imaging and Emulating Rainbow
Am 14.08.2016 um 12:55 schrieb Rob Jarratt:
I have a Rainbow 100+ with a working hard disk. I want to image the disk
before it fails and then emulate the Rainbow. The disk is an RD51 and
appears to have 4 partitions on it.
Regards
Rob
I can't help but you make me remembering some files for the rainbow I got
from a nice guy in australia whos's playing mostly with his os/2 stuff ;-)
http://oldcomputers.dyndns.org/public/pub/mirror/os2site/sw/dec/rainbow/inde
x.html
for my own CP/M systems I got a MFM Hard Disk Reader/Emulator from
http://www.pdp8.net/mfm/mfm.shtml.
It isn't useful for your part but with it I managed to replace my MFM-Drive
and store it in a saver place.
Hi rob
I can make a zip, for Rainbow or for all the dec stuff?
11:14 a.m.
Am 14.08.2016 um 19:38 schrieb Rob Jarratt:
Thanks for that link with the files, that looks really
useful. Is there a
zip of the whole lot anywhere or an FTP site, to make it easier to download?
Regards
Rob
Hope it works...
http://oldcomputers.dyndns.org/public/pub/mirror/os2site/!komplete_dec-stuf…
12:07 p.m.
-----Original Message-----
From: cctalk [mailto:cctalk-bounces at classiccmp.org] On Behalf Of
fritz_chwolka at web.de
Sent: 14 August 2016 19:14
To: cctalk at classiccmp.org
Subject: Re: Imaging and Emulating Rainbow
Am 14.08.2016 um 19:38 schrieb Rob Jarratt:
> Thanks for that link with the files, that looks really useful. Is
> there a zip of the whole lot anywhere or an FTP site, to make it easier
to
download?
Thanks, I got that!
I noticed you have a Pro folder as well, any chance you could zip that too?
Regards
Rob
Regards
Rob
Hope it works...
http://oldcomputers.dyndns.org/public/pub/mirror/os2site/!komplete_dec-
stuff_from_os2site.zip
1:28 p.m.
Am 14.08.2016 um 21:07 schrieb Rob Jarratt:
I zipped all so you have it .
Greetings
fritz
-----Original
Message-----
From: cctalk [mailto:cctalk-bounces at classiccmp.org] On Behalf Of
fritz_chwolka at web.de
Sent: 14 August 2016 19:14
To: cctalk at classiccmp.org
Subject: Re: Imaging and Emulating Rainbow
Am 14.08.2016 um 19:38 schrieb Rob Jarratt:
> Thanks for that link with the files, that looks really useful. Is
> there a zip of the whole lot anywhere or an FTP site, to make it easier
to
download?
Thanks, I got that!
I noticed you have a Pro folder as well, any chance you could zip that too?
Regards
Rob
Regards
Rob
Hope it works...
http://oldcomputers.dyndns.org/public/pub/mirror/os2site/!komplete_dec-
stuff_from_os2site.zip 
6:46 p.m.
I downloaded the site and the zip file today (in the last 6 hours or so,
Sunday PDT US time, I saw your don't mirror warning after i'd taken a
lot, so continued.
many thanks for the stuff there. I had some things from the profolder,
but not the floppy images.
thanks
jim
On 8/14/2016 3:17 PM, Rob Jarratt wrote:
Ah, I hadn't actually opened it to look inside and thought it was just the
Rainbow folder. Thank you very much!
Regards
Rob
> I noticed
you have a Pro folder as well, any chance you could zip that
too?
Regards
Rob
I zipped all so you have it .
15 Aug
15 Aug
7:12 a.m.
Don't know if would possibly work n those as isn't bviosly NT,but there's a
disk for pound fifty eBay.uk open V box?!!
On Monday, August 15, 2016, jim stephens <jwsmail at jwsss.com> wrote:
I downloaded the site and the zip file today (in the
last 6 hours or so,
Sunday PDT US time, I saw your don't mirror warning after i'd taken a lot,
so continued.
many thanks for the stuff there. I had some things from the profolder,
but not the floppy images.
thanks
jim
On 8/14/2016 3:17 PM, Rob Jarratt wrote:
--
Sent from Gmail Mobile incognito
I noticed you have a Pro folder as well, any
chance you could zip that
too?
Regards
the
Rainbow folder. Thank you very much!
Regards
Rob
Rob
I zipped all so you have it .
Ah, I hadn't actually opened it to look inside and thought it was just 
8:38 a.m.
This account was unsubscribed.... not sure how this got through subsequently.
Checking....
-----Original Message-----
From: cctalk [mailto:cctalk-bounces at classiccmp.org] On Behalf Of Steve Bez
Sent: Monday, August 15, 2016 9:13 AM
To: General Discussion: On-Topic and Off-Topic Posts <cctalk at classiccmp.org>
Subject: Re: Imaging and Emulating Rainbow
Don't know if would possibly work n those as isn't bviosly NT,but there's a
disk for pound fifty eBay.uk open V box?!!
On Monday, August 15, 2016, jim stephens <jwsmail at jwsss.com> wrote:
I downloaded the site and the zip file today (in the
last 6 hours or
so, Sunday PDT US time, I saw your don't mirror warning after i'd
taken a lot, so continued.
many thanks for the stuff there. I had some things from the
profolder, but not the floppy images.
thanks
jim
On 8/14/2016 3:17 PM, Rob Jarratt wrote:
--
Sent from Gmail Mobile incognito
I noticed you have a Pro folder as well, any
chance you could zip
that
too?
Regards
the
Rainbow folder. Thank you very much!
Regards
Rob
Rob
I zipped all so you have it .
Ah, I hadn't actually opened it to look inside and thought it was
just 
9:35 a.m.
Sorry, that was my fault, it was sitting in the moderation queue. No
more, promise!
On 15/08/16 17:38, Jay West wrote:
This account was unsubscribed.... not sure how this
got through subsequently. Checking....
-----Original Message-----
From: cctalk [mailto:cctalk-bounces at classiccmp.org] On Behalf Of Steve Bez
Sent: Monday, August 15, 2016 9:13 AM
To: General Discussion: On-Topic and Off-Topic Posts <cctalk at classiccmp.org>
Subject: Re: Imaging and Emulating Rainbow
Don't know if would possibly work n those as isn't bviosly NT,but there's a
disk for pound fifty eBay.uk open V box?!!
On Monday, August 15, 2016, jim stephens <jwsmail at jwsss.com> wrote:
--
Lawrence Wilkinson lawrence at ljw.me.uk
Ph +41(0)79 926 1036 http://www.ljw.me.uk
I downloaded the site and the zip file today (in
the last 6 hours or
so, Sunday PDT US time, I saw your don't mirror warning after i'd
taken a lot, so continued.
many thanks for the stuff there. I had some things from the
profolder, but not the floppy images.
thanks
jim
On 8/14/2016 3:17 PM, Rob Jarratt wrote:
> I noticed you have a Pro folder as well, any chance you could zip
> that
>> too?
>> Regards
>>> Rob
>>>
>>>
>>> I zipped all so you have it .
>> Ah, I hadn't actually opened it to look inside and thought it was
>> just
> the
> Rainbow folder. Thank you very much!
>
> Regards
>
> Rob
>
>
>
>
--
Sent from Gmail Mobile incognito
3051
days inactive
3052
days old
29 comments
15 participants
participants (15)
-
aek＠bitsavers.org -
alexandre.tabajara＠gmail.com -
cclist＠sydex.com -
cctalk＠beyondthepale.ie -
dave.g4ugm＠gmail.com -
fritz_chwolka＠t-online.de -
imp＠bsdimp.com -
jules.richardson99＠gmail.com -
jwest＠classiccmp.org -
jwsmail＠jwsss.com -
kwwacker＠ptd.net -
lawrence＠ljw.me.uk -
lists＠sk2.org -
robert.jarratt＠ntlworld.com -
sbez742＠gmail.com