On Sun, 29 Jul 2001 CLASSICCMP(a)trailing-edge.com wrote:
From your
description of your current SMD drive controller, it's probably
an Emulex QD32
or QD33, in which case it ought to handle the newer M2333
Alas, it is not one of those. What I have in my 11/73 is an SC02/C for
RK06 amd RK07 emulation.
and M2382 just fine. I think your first priority
should be to figure
out what you've currently got :-).
See above...
The SC03 will handle a Fuji Eagle (with a few slight
adjustments to take
into account interleaving), but not anything with a faster data rate,
unfortunately.
Ok, since it won't work with my drives, what I really need to do at
this point I suppose is to look for a Fujitsu Eagle. :-) I wonder if
my CDC 9" drive is slow enough for the SC03. Alas, it's not easily
rack-mountable. Anyway, now to figure out a way to get other two
trays of these drives mounted near the top of my 11/73's
rack... hopefully three trays of these drives, and an PDP-8/e on top
of the rack, won't make this too top-heavy. Perhaps I should move the
CPU and expansion chasis, or RX02 drives, to the top position in the
rack, and the six 8" SMD drives to the bottom of the rack, leaving the
TS05 in the middle of the rack. Any thoughts on this?
By the way, does anyone know of any sources for a cheap Q-bus RL02
controller as well as a cheap QD32 or QD33?
--
Copyright (C) 2001 R. D. Davis The difference between humans & other animals:
All Rights Reserved an unnatural belief that we're above Nature &
rdd(a)rddavis.net 410-744-4900 her other creatures, using dogma to justify such
http://www.rddavis.net beliefs and to justify much human cruelty.