23 Jul
2018
23 Jul
'18
12:55 a.m.
Does somebody know how to set the IACK and BG backplane jumpers for the MVME188 CPU?
Remove them all? Leave them in behind the memory and/or cpu board(s)? Something else? All
the documentation I can find are for the normal VME SBCs, which the 188 isn't.
Thanks!
ok
bear.
--
until further notice
23 Jul
23 Jul
3:20 p.m.
Assuming the MVME188 must also work in an backplane that has automatic
IACK/BG bypass, you would remove them in all slots that have a board
installed. AFAIK nothing gets damaged if you get it wrong, it's just that
VME cards further back on the bus won't work properly.
On Mon, Jul 23, 2018 at 12:55 AM, r.stricklin via cctalk <
cctalk at classiccmp.org> wrote:
Does somebody know how to set the IACK and BG
backplane jumpers for the
MVME188 CPU? Remove them all? Leave them in behind the memory and/or cpu
board(s)? Something else? All the documentation I can find are for the
normal VME SBCs, which the 188 isn't.
Thanks!
ok
bear.
--
until further notice
2344
days inactive
2344
days old
1 comments
2 participants
participants (2)
-
bear＠typewritten.org -
rp＠servium.ch