10 Oct
1998
10 Oct
'98
5:22 p.m.
A non-text attachment was scrubbed...
Name: not available
Type: text
Size: 765 bytes
Desc: not available
Url :
http://www.classiccmp.org/pipermail/cctalk/attachments/19981010/4a2be701/at…
11 Oct
11 Oct
3:50 a.m.
A non-text attachment was scrubbed...
Name: not available
Type: text
Size: 1153 bytes
Desc: not available
Url :
http://www.classiccmp.org/pipermail/cctalk/attachments/19981011/8e771920/at…
5:15 a.m.
Cameron Kaiser wrote:
Good think you didn't run it through the dry cycle, or chips like the PLA
might short out (very sensitive to heat). Are you sure the soap wouldn't
have hurt the solder or board traces, though?
Soap won't hurt either the solder or the copper traces. Hard water can
leave deposits on the board when it drys, and if *I* were to use the
dishwasher, I would do a final rinse in either distilled or DI water before
drying.
9573
days inactive
9573
days old
2 comments
3 participants
participants (3)
-
ckaiser＠oa.ptloma.edu -
jim＠calico.litterbox.com -
marvin＠rain.org