I would be interested in the VAXstation 4000/90 and I am on the lookout for
DSSI drives to put in a 3400 and a 4000-200, but it sounds like you are
talking about external cabinets and I am not sure I have space for these
(how big are they?). I wouldn't mind a spare VT220 as well. I was also given
a Sun Ultra 5 a little while back and I think I need a special keyboard and
mouse combination, would you have one of these?
I live in Manchester, we would need to work something out.
Regards
Rob
-----Original Message-----
From: cctalk-bounces at
classiccmp.org [mailto:cctalk-
bounces at
classiccmp.org] On Behalf Of Dan Williams
Sent: 21 October 2010 19:12
To: General Discussion: On-Topic and Off-Topic Posts
Subject: Moving House - Need to downsize
Hi,
I am moving to a smaller place and need to off-load some bits I am not
going
to have space for.
An Octane (works but case in a bad shape) dual processor sse graphics it
had
1gb of memory but some was bad, I think it's 768mb
A Sun Blade 2000 Dual
processors with 1gb memory and 18gb drive.
2 rack mount sparc machines with 2xmachines in each unit (Non sun) I think
they are 500mhz and 1gb memory A Dell Itanium rack mount machine which
won't run VMS. I Vax 4000/90 with a non working PSU A non working ex-
millitary oscilloscope I need to check but a number of vt220 terminals
with
keyboards.
I'm sure these will be popular: I have 8x big heavy drive DSSI drive
units.
They have not been powered up for a few years. They
have
scsi-->dssi convertor cards in them. They currently have 1GB and 2GB
full height drive units in them. But they can take up to 9GB.
I also have cabling which I have to sort out mainly for SUN and DEC. I
have all
the cabling for the dssi drives and a lot of monitor
and other cables for
Vaxstation 3100's.
I am based in Central London and all of the machines are too heavy for me
to
ship. But let me know I'm sure we can work
something out.
These are available for free, but as at the moment the only machines I am
keeping (or allowed to keep) are my RM machines I am interested in any
cables software and monitors for 380Z, 480Z and early PC's I am going to
be
quite busy all over the weekend, so I may not get a
chance to reply until
monday.
Dan