<Hi. Just a quick question which is kind of off topic - with switched powe <supplies like those in modern PCs, when it says the input current is 7 amps <115 volts, is that the constant no matter how much the computer itself draw 7A@115V... an 800w PS??? <or the maximum, no matter what? If it's the latter my computer room is <going to need more circuits in a big hurry... The input current is load dependant above a minimum current. If that 7A PS is real I'd expect a minimum of .5A-1.5A at near minimum load. Plain english, input current is proportional to load current plus some internal losses. If it helps I have 6 vaxen on the same 15A line. Three 3100/M10E, one 3100/M76, two VS2000, BA123 MicrovaxII and one BA23 MicrovaxII. Worse case numbers would have me using a 25-30A line. Real numbers are far lower. Also the 3100 PS is only some 160W but if the aux outlet is present for say a monitor then there is +3-5A added to the input current for that outlet. So it's easy to have a spec for 7A but it's likly allowing 3A for a monitor or somesuch. Allison