Hi all. I'm looking to sell the following DEC stuff: 5 MicroVAX 2000s. All have RD54s, Ethernet, bottom expansion and between 4 and 14MB of RAM. All power up to the >>> prompt. Some boot to VMS, some don't. The RD54s are questionable, 1 of them seems to be bad. M1502 bus output interface board, in d|i|g|i|t|a|l packaging 2 PDP-11/04s, bad condition VAXstation 3100 M30, boots to >>>, Conner 100MB SCSI drive (wiped), floppy VAXstation 3100 M38 (might actually be M10 in an M38 case), untested MicroVAX 3100 KA41 (M20 or M20e?), TZ30 tape, RZ23-E hdd, untested MicroVAX 3100 M10, RZ23-E hdd, TZ30 tape, untested I may be willing to test these machines for a serious buyer. MicroVAX II, BA23, TK50, RD53-A, belonged to DEC?, with M3106 DZQ11 x2, M9047 bus grant, M7555 RQDX3, M7546 TQK50, M7607 memory, Standard Memories MM-169 w/ 144x HM50256, M7606 KA630 Untested, DC wiring harness not inspected! Cables: bc17y-03, 50 pin 3 row male-male scsi? cable - 3 that look OK and 1 with a bent shell that could be bent back centronics m to hd68 m, screws centronics m to hd68 m, clips Please email me with questions or offers for part or all if interested. I'll ship the cables and M1502 but the computers are pickup/delivery only in the Los Angeles area. -- Adam