10 Sep
2003
10 Sep
'03
10:28 a.m.
Yes, I can also do it, either duplicate a current prom, or use a bin or
hex file on a PC. Near Boston and Providence
Joe Heck
10 Sep
10 Sep
10:48 a.m.
Here is the file, let me know if you can burn it
----- Original Message -----
From: <TRASH3(a)splab.cas.neu.edu>
To: <cctalk(a)classiccmp.org>
Sent: Wednesday, September 10, 2003 11:14 AM
Subject: Re: Help with a eprom
Yes, I can also do it, either duplicate a current
prom, or use a bin or
hex file on a PC. Near Boston and Providence
Joe Heck
[demime 1.01a removed an attachment of type application/octet-stream which had a name of
scsirevc.bin]
11:18 a.m.
I don't intend to waste time duplicating effort. If someone else
has a 27c128 ready to burn, then that will save me hunting through
my box of old proms. I know that I have a 27c256 and am guessing
that by burning the code into both halves of the 27c256, it will
work just fine.
TeoZ needs to coordinate this effort a bit...
--tom
At 11:40 AM 9/10/2003 -0400, you wrote:
Here is the file, let me know if you can burn it
----- Original Message -----
From: <TRASH3(a)splab.cas.neu.edu>
To: <cctalk(a)classiccmp.org>
Sent: Wednesday, September 10, 2003 11:14 AM
Subject: Re: Help with a eprom
Yes, I can also do it, either duplicate a current
prom, or use a bin or
hex file on a PC. Near Boston and Providence
Joe Heck
[demime 1.01a removed an attachment of type application/octet-stream which
had a name of scsirevc.bin]
11:37 a.m.
----- Original Message -----
From: "Tom Uban" <uban(a)ubanproductions.com>
To: <cctalk(a)classiccmp.org>
Sent: Wednesday, September 10, 2003 12:10 PM
Subject: Re: Help with a eprom
I don't intend to waste time duplicating effort.
If someone else
has a 27c128 ready to burn, then that will save me hunting through
my box of old proms. I know that I have a 27c256 and am guessing
that by burning the code into both halves of the 27c256, it will
work just fine.
TeoZ needs to coordinate this effort a bit...
--tom
I dont want to waste anybodies time either, I told a few people out of the
country that I was looking for somebody in the US since postage is more
expensive and shipping takes alot longer. A couple people have replied in
the US but havnt heard from anybody that has found the desired chip and can
use the file I sent. I have no idea if a 27c256 would work on the old card.
3 p.m.
I have a GOOD stock of 27128s. I can attempt to burn the EPROM or I can
send someone else a couple of EPROMs if they want to do it. However there's
a big hamfest coming up this weekend so I won't have time to do anything
before next week.
Where are you at TeoZ?
Joe
At 12:28 PM 9/10/03 -0400, you wrote:
----- Original Message -----
From: "Tom Uban" <uban(a)ubanproductions.com>
To: <cctalk(a)classiccmp.org>
Sent: Wednesday, September 10, 2003 12:10 PM
Subject: Re: Help with a eprom
I don't intend to waste time duplicating
effort. If someone else
has a 27c128 ready to burn, then that will save me hunting through
my box of old proms. I know that I have a 27c256 and am guessing
that by burning the code into both halves of the 27c256, it will
work just fine.
TeoZ needs to coordinate this effort a bit...
--tom
I dont want to waste anybodies time either, I told a few people out of the
country that I was looking for somebody in the US since postage is more
expensive and shipping takes alot longer. A couple people have replied in
the US but havnt heard from anybody that has found the desired chip and can
use the file I sent. I have no idea if a 27c256 would work on the old card.
7789
days inactive
7789
days old
4 comments
4 participants
participants (4)
-
rigdonj＠cfl.rr.com -
teoz＠neo.rr.com -
TRASH3＠splab.cas.neu.edu -
uban＠ubanproductions.com