30 Dec
2007
30 Dec
'07
11:04 a.m.
Hi,
I am restoring a Vector Graphic computer and would like to add a hard
disk drive. The controller only supports two kinds of hard disk
drives, the ST506 and ST412. The HD controller is hard coded to
support these DRIVES not just a compatible interface and relies on a
special signal present only in these actual drives.
If anyone has one or more of these hard disk drives they would like to
sell me, please contact me or reply here.
Thanks!
Andrew Lynch
30 Dec
30 Dec
1:40 p.m.
Andrew Lynch wrote:
Hi,
I am restoring a Vector Graphic computer and would like to add a hard
disk drive. The controller only supports two kinds of hard disk
drives, the ST506 and ST412. The HD controller is hard coded to
support these DRIVES not just a compatible interface and relies on a
special signal present only in these actual drives.
If anyone has one or more of these hard disk drives they would like to
sell me, please contact me or reply here.
Thanks!
Andrew Lynch
Jerome Fine replies:
I may still have an ST412, actually an RD51.
I am in Toronto.
If no one else replies, contact me and I will check
to see if the ST412 is still stored there.
Sincerely yours,
Jerome Fine
--
If you attempted to send a reply and the original e-mail
address has been discontinued due a high volume of junk
e-mail, then the semi-permanent e-mail address can be
obtained by replacing the four characters preceding the
'at' with the four digits of the current year.
2:18 p.m.
From: lynchaj at yahoo.com
Hi,
I am restoring a Vector Graphic computer and would like to add a hard
disk drive. The controller only supports two kinds of hard disk
drives, the ST506 and ST412. The HD controller is hard coded to
support these DRIVES not just a compatible interface and relies on a
special signal present only in these actual drives.
If anyone has one or more of these hard disk drives they would like to
sell me, please contact me or reply here.
Thanks!
Andrew Lynch
Hi Andrew
First, I'm not sure what you mean by ST506 and ST412. I thought
these were different in that one had a signal used for write precompensation
while the other used the same line for a head select.
If you use a newer drive that has built in precomp, just
tie the line going to the drive so that it ignores the Precomp
from the controller.
I seem to recall some
signal from the drive that was on
the data cable. I don't recall what it was that came from the
drive but it seems like it was some type of write protect or
something. In any case this line can be cut and tied
as well.
Dwight
_________________________________________________________________
The best games are on Xbox 360. Click here for a special offer on an Xbox 360 Console.
http://www.xbox.com/en-US/hardware/wheretobuy/
2:39 p.m.
From: dkelvey at hotmail.com
Hi
I just checked on it and your request doesn't make sense.
There was a spec for the ST506 and a newer spec ST506/412.
For your problem, I'd think the number of heads would
be more important. The other issue would be stp time.
Dwight
_________________________________________________________________
i?m is proud to present Cause Effect, a series about real people making a difference.
http://im.live.com/Messenger/IM/MTV/?source=text_Cause_Effect
From: lynchaj at yahoo.com
Hi,
I am restoring a Vector Graphic computer and would like to add a hard
disk drive. The controller only supports two kinds of hard disk
drives, the ST506 and ST412. The HD controller is hard coded to
support these DRIVES not just a compatible interface and relies on a
special signal present only in these actual drives.
If anyone has one or more of these hard disk drives they would like to
sell me, please contact me or reply here.
Thanks!
Andrew Lynch
Hi Andrew
First, I'm not sure what you mean by ST506 and ST412. I thought
these were different in that one had a signal used for write precompensation
while the other used the same line for a head select.
If you use a newer drive that has built in precomp, just
tie the line going to the drive so that it ignores the Precomp
from the controller.
I seem to recall some signal from the drive that was on
the data cable. I don't recall what it was that came from the
drive but it seems like it was some type of write protect or
something. In any case this line can be cut and tied
as well.
Dwight
6202
days inactive
6202
days old
3 comments
3 participants
participants (3)
-
dkelvey＠hotmail.com -
jhfinedp3k＠compsys.to -
lynchaj＠yahoo.com