< Has anyone tried wiring an 8" RX52 floppy straight to a modern PC < controller? I did the best I know how, and I *appear* to have a What is an RX52 floppy? I'll presume you mean the rather large dual drive RX02. The DEC 8" floppies are RX01/2 and have their own internal controller. That would make RX01 or 02 disk system very hard to wire to a PC floppy controller, like near impossible. FYI: The DEC RX02 DD format is not readable by any standard floppy controller chip. RX01 however is standard 128 bytes IBM softsector format. RX50 drives are fairly easy to wire to a PC it is however single sided and dual drive with one spindle. The later item will cause all mannor of errors if the driver doesn't internally know the two drives have a common positioner. However FD55s jumperd for slow spindle and only using one side work better! < On a similar note, does anyone happen to have a Compaticard for < trade/sale? Compaticard can only read RX01. Allison