20 Feb
2022
20 Feb
'22
10:33 a.m.
Does anyone have a video or printed procedure they can send me or point me
somewhere that could help?
Thanks, Paul
20 Feb
20 Feb
9:51 p.m.
On 2/20/2022 2:33 AM, Paul Anderson via cctalk wrote:
Does anyone have a video or printed procedure they can
send me or point me
somewhere that could help?
Are we talking about the 10 inch fan at the top of the rack? I had to
replace one of those recently, but it wasn't very difficult.
Vince
21 Feb
21 Feb
4:11 a.m.
I'm sorry, I meant info on rebuilding, bearing replacement and sources for
bearings.
That's what I get for sleep typing at 4:30.
Thanks, Paul
On Sun, Feb 20, 2022 at 4:33 AM Paul Anderson <useddec at gmail.com> wrote:
Does anyone have a video or printed procedure they can
send me or point me
somewhere that could help?
Thanks, Paul
5:01 a.m.
Hi Paul,
At first I have replaced the bearings in the original two 10" fans in the
top of my LAB-8/e rack hoping to reduce the noise substantially.
The new bearings did not noticeably improve the noise levels.
After a few days of suffering through the noise I decided to replace them
with modern and quieter versions which move the same volume of air.
As I am in Australia I changed from the original 115V fans to 240V fans
which meant I no longer had to use the large 240V to 115V step-down
transformer in the back of the H960 rack.
Regards
Tom
On Mon, Feb 21, 2022 at 12:11 PM Paul Anderson via cctalk <
cctalk at classiccmp.org> wrote:
I'm sorry, I meant info on rebuilding, bearing
replacement and sources for
bearings.
That's what I get for sleep typing at 4:30.
Thanks, Paul
On Sun, Feb 20, 2022 at 4:33 AM Paul Anderson <useddec at gmail.com> wrote:
Does anyone have a video or printed procedure
they can send me or point
me
somewhere that could help?
Thanks, Paul
820
days inactive
821
days old
3 comments
3 participants
participants (3)
-
ccth6600＠gmail.com -
useddec＠gmail.com -
vincent.slyngstad＠gmail.com