DZQ11 Config Question - test-drb@ccmp.vtda.org

28 Jan 2004

That did the trick!
Thanks guys.  It comes up as KB5 - 8 now, but hey, it works!

I'm gonna enjoy multiple RT-11 sessions on this thing .. . .

Jeff

On Wed, 28 Jan 2004 11:09:54 -0700 Kevin Handy &lt;kth(a)srv.net&gt; writes:
...
  jeff.kaneko(a)juno.com wrote:

 Does anyone out there know what CSR Address and
vector I should
set this to to make RSTS/E happy?  When RSTS INIT's, it bitches
that the board doesn't interrupt, and happily disables it.

I'm using it in an 11/73, with RQDX3, 1MB ram, TQK70, the
aforementioned DZQ11, and a DEQNA.

If I do a SHOW DEV, KB1-4 is listed, but no CSR. . . .

  According to VMS (assuming that the TK50 and TK70 have the same 
 addresses)
 there aren't any floating address/interrupts, so: CSR: 760100  
 Vector: 300*

 $ run sys$system:sysgen
 SYSGEN>  CONFIG
 DEVICE> rqdx3
 %SYSGEN-I-EQV_NOTICE, equivalent name - device RQDX3 will be output 
 as UDA
 DEVICE> tqk70
 %SYSGEN-W-DEVNOTKNWN, device not known: /TQK70/
 DEVICE> tk50
 %SYSGEN-I-EQV_NOTICE, equivalent name - device TK50 will be output 
 as TU81
 DEVICE> dz11
 DEVICE> deqna
 %SYSGEN-I-EQV_NOTICE, equivalent name - device DEQNA will be output 
 as QNA
 DEVICE>  Exit
 Device: UDA     Name: PUA        CSR: 772150     Vector: 154    
 Support: 
 yes
 Device: TU81    Name: PTA        CSR: 774500     Vector: 260    
 Support: 
 yes
 Device: QNA     Name: XQA        CSR: 774440     Vector: 120    
 Support: 
 yes
 Device: DZ11    Name: TTA        CSR: 760100*    Vector: 300*   
 Support: 
 yes
 SYSGEN> 

________________________________________________________________
The best thing to hit the internet in years - Juno SpeedBand!
Surf the web up to FIVE TIMES FASTER!
Only $14.95/ month - visit www.juno.com to sign up today!