Dear Classic Computing Community, I'm on this list for quite a while an enjoy reading very much. As long I have room for I'm collecting a bit myself. Some time ago I came in touch with our local museum. They collected some stuff an put it in their storage years ago. They eventually put the machines on display in future. The storage had moved to another building and most of the information about the systems in storage has been lost. In the last weeks i tried to identify most of the bigger stuff, but now I'm stuck. It seems that there are a couple IBM-Systems, but I'm not familiar with IBM. As long I found out: There is an 1131 CPU and a 1403 Printer - I think this machine (CPU and Printer) is rather complete. I contacted the guys at ibm1130.org last week, they are very nice and helpful! Does anybody know what power connection would be needed to fire this one up? With _lots_ of cleaning and some repair work it should be in working order... Then we have a Pile of various IBM-Stuff, which I cannot determine which belongs together. I hope you can help out a bit - I'll list the stuff below: 2319-Disk Storage 2821-Control Unit 3047-Power Unit - I couln't find anything on this box... 3145-Processing Unit - This should be a Sys/370 Model 145, as far I found out... 3215-Console - Maybe for the 3145? 3330-Disk, 3 Cabinets. 3741-Data Station. Like the one seen on http://fwtunesco.org/musi/wolz/ but with only one drive. 3830-Storage Control - Disk? I have no details on this. Suggestions? 5415-Processing Unit - System 3 Model 15 is all I know... 5445-??? It should be some sort of Mass Storage Controller... One Dual Drive for - I think - Disk Stacks/Packs, It is a top loading device, like 2 washing machines side by side... - I couldn't read the number as it's near the wall and I could not move it. There is another Diskdrive too, wich seems to be like the 3330, but some different... All I could do is to list the devices. As I have 2 CPU's I think there are 2 Systems. Any suggestions? There is some Siemens Stuff too... One System 300/320 Processor Cabinet with 2 additional Racks. A System 300-R10 Processor Rack. The machines look like 16-Bit, with nice blinkenlights and flipswitches. A papertape-reader/punch and a dual 9(?)-track drive (on this drive there are still 2 tapes loaded - One is labeled System) are the only peripherals i have. I really want to get the tape off the drive to a) read it or b) store it in adequate environment. Is there some information present about siemens stuff? I googled for a while, but there was nothing really statisfying info out there... In Addition to all above we have a "Data 100 Batch Terminal" wich seems to be a card reader/punch. Does somebody know them? Some Documentation should be here, but as with all the docs I couldn't dig through all the binders and boxes ... Please excuse my horrible english, but I hope you could imagine what has been meant :) My best Regards, Wolfgang Eichberger PS.: For my private Interests I am looking for a PDP 11/23 maybe with one or two RL02 drives, if somebody knows some sources. It could be a different processor or a nice microvax as well :) ======================================================================= Wolfgang Eichberger?????????????????? phone: +43-732-7720-12655 ????????????????????????????????????? cell.: +43-664-240-65-92 Qualit?tsmanager, EDV - Koordinator?? fax? : +43-732-7720-12918 ????????????????????????????????????? email: wolfgang.eichberger(a)bps.at ----------------------------------------------------------------------- O?. Boden- und Baustoffpr?fstelle GmbH K?rntnerstra?e 12, 4020 Linz - AUSTRIA ======================================================================= ?