Greg asked:
Having searched throughout HPs web site(s), I've
come to the conclusion that
anything older than a week or so won;t have any usefull information there.
Agreed.
If anyone has any switch settings for my C1525G DDS1
tape drive, it would be
most helpfull - I'm trying to hang it off a MicroVAX3100 model10e currently.
From:
http://www.eztechstuff.com/archives/th99/p/txt/70119.txtHEWLETT-PACKARD COMPANY
HP C1525G/H, SURESTORE 2000
Device Type Internal Tape Drive
Interface SCSI-2
Format DDS
Sustained Transfer Rate 183 KBPS
Size 3.5 in. half height
5.25 in. half height (with bezel)
View Top
USER CONFIGURABLE SETTINGS
Setting Label Position
? Factory configured - do not alter JP5 Unidentified
DRIVE SELECT ID
Drive ID JP1 JP2 JP3
0 Open Open Open
1 Open Open Closed
2 Open Closed Open
3 Open Closed Closed
4 Closed Open Open
5 Closed Open Closed
6 Closed Closed Open
7 Closed Closed Closed
MANUFACTURERS RECOMMENDED MEDIA
Tape Capacity Without Compression
90 meter DDS cartridge 2.0 GB
DIAGNOSTIC LED(S)
LED1 LED2 Condition
(Green) (Yellow)
Off Off No power/drive Idle, no cartridge
On Off Cartridge loaded, No Activity
Flash Off Cartridge loaded, Activity
Pulse Off Loading/Unloading/Ejecting/Power-On
Off On Self Test Failure
Off Pulse No Cartridge, Caution (cleaning required)
On Pulse Cartridge loaded, Caution (cleaning
required)
Flash Pulse Cartridge loaded, Drive Active, Caution
(cleaning required)
Pulse Pulse Cartridge loading/unloading, Caution
(cleaning required)
hth,-dq