> It might be worth mentioning that Apple //e's
don't have a slot 0. The
> "language card" (really just an additional 16K of bank-switched RAM) is
> built-in. Also, on the //e slot 3 is tied in to the auxiliary slot, where
> normally RAM and 80-column boards go. If you've got something in the aux.
> slot, you can't put anything in slot 3, with some exceptions. For
> instance, I have an AE TransWarp accelerator board in my //e that has a
> 3.3Mhz 6502 CPU which overrides the motherboard 6502 upon bootup. This
> board is great in that it plugs into slot 3, in conjunction with my
> expanded 80-column card in the aux. slot, and therefore does not waste a
> slot.
Can anyone explain the reason why Apple put the Aux
slot directly in
line with slot 3 on the European version of the IIe? For example, I
have a full length Ramworks III board in the Aux slot and this
completely obscures slot 3 so an accelerator so Sam's trick with the
Transwarp will not work.
THe AUX slot _is_ slot #3. just some different signals. For
any 'regular' use you can only use the slot #3 connector or
AUX connector. The Transwarp is just (like some other very
special cards) desigend for uste in #3 while AUX is hosting
the 'regular' card. In fact, any card, able to run in slot
#0 (using no slot resources like RAM and (E)PROM space) will
coexist in #3 with a card in AUX.
The location was choosed to avoid that owners will plug in
two cards using the slot resources into AUX and #3, since
this (may) result in address conflicts. A far better solution
than any message in a manual for the usual I-am-an-expert-I-
-never-read-manuals user.
Gruss
H.
--
Ich denke, also bin ich, also gut
HRK