On Wed, Feb 23, 2011 at 10:05 AM, Sellam Ismail <sellam at vintagetech.com> wrote: AFAIK, you'll probably need a Radius-brand video adapter that knows how to handle the pivot function. Here's a link to what looks like the IIsi version of the card - http://www.applefritter.com/node/4347 If anyone reading this thread has a cache of Radius materials, I'd like to hear about it too. I've had a Radius Fullpage display and card for a Mac SE for some time but ISTR the last time I tried to set it up, the firmware on the card was a couple of point-releases too old for the drivers that we found online. Essentially, long ago, when such things were used daily, my mother bought a used FPM and SE card and asked me to install them in her SE. Physical installation was easy, but we never could come up with a combination of software and firmware that worked. IIRC, the screen lit up, erased to all white or a half-tone pattern (possibly with a Radius logo) - all card-to-monitor activities - then blanked because there was nothing happening from the OS-to-card part of things, and the drivers we had either didn't recognize the card at all, or at best, threw an error about a firmware mismatch (I _think_ there may have been a mention of needing, say, 1.53 and the card was marked 1.51, but those numbers could be off by a bit). I looked around in the days before the web when everything was on ftp servers, and never came up with anything useful. Now, my hope is that someone, somewhere, archived all things Radius and I have a chance of coming up with some combination of bits that works. It's no emergency, but I would like to see this thing work at least once. -ethan