8 Dec
2018
8 Dec
'18
1:35 a.m.
On Fri, Dec 7, 2018 at 10:29 PM Rod G8DGR via cctalk <cctalk at classiccmp.org>
wrote:
It can only do 110 baud !!
Unless you have an oddball SLU, this is not true -- what do you have
installed? The earlier M8650 and the later M8655 can both be jumpered for
higher baud rates.
- Josh
Sent from Mail for Windows 10
From: Pete Turnbull via cctalk
Sent: 08 December 2018 03:15
To: cctalk at classiccmp.org
Subject: Re: PDP-8/e
On 07/12/2018 17:46, Jon Elson via cctalk wrote:
On 12/07/2018 11:38 AM, Rod G8DGR via cctalk
wrote:
But wouldn't it be better to set the serial card in the PDP-8/E to
something faster anyway? Although on one of the serial cards, that
requires a crystal change, so though commonly done, may not be practical
for Rod.
--
Pete
Pete Turnbull
Oh good how do you set them to 110 baud?
Oh, WOW! Good catch, it only goes down to 300 baud! major screwup,
ought to be reported to the developers. 
8 Dec
8 Dec
1:38 a.m.
On Sat, Dec 8, 2018 at 12:36 AM Josh Dersch via cctalk <
cctalk at classiccmp.org> wrote:
On Fri, Dec 7, 2018 at 10:29 PM Rod G8DGR via cctalk
<
cctalk at classiccmp.org>
wrote:
Maybe an M865? I don't remember if those have jumpers or not. I seem to
recall it being current loop only, though.
Kyle
It can only do 110 baud !!
Unless you have an oddball SLU, this is not true -- what do you have
installed? The earlier M8650 and the later M8655 can both be jumpered for
higher baud rates.
4:55 a.m.
Nice try Josh - close ? you have to change the crystal first and you can?t get them.
Rod Smallwood - Digital Equipment Corporation 1975 ? 1985
Sent from Mail for Windows 10
From: Josh Dersch via cctalk
Sent: 08 December 2018 06:36
To: General Discussion: On-Topic and Off-Topic Posts
Subject: Re: PDP-8/e
On Fri, Dec 7, 2018 at 10:29 PM Rod G8DGR via cctalk <cctalk at classiccmp.org>
wrote:
It can only do 110 baud !!
Unless you have an oddball SLU, this is not true -- what do you have
installed? The earlier M8650 and the later M8655 can both be jumpered for
higher baud rates.
- Josh
Sent from Mail for Windows 10
From: Pete Turnbull via cctalk
Sent: 08 December 2018 03:15
To: cctalk at classiccmp.org
Subject: Re: PDP-8/e
On 07/12/2018 17:46, Jon Elson via cctalk wrote:
On 12/07/2018 11:38 AM, Rod G8DGR via cctalk
wrote:
But wouldn't it be better to set the serial card in the PDP-8/E to
something faster anyway? Although on one of the serial cards, that
requires a crystal change, so though commonly done, may not be practical
for Rod.
--
Pete
Pete Turnbull
Oh good how do you set them to 110 baud?
Oh, WOW! Good catch, it only goes down to 300 baud! major screwup,
ought to be reported to the developers.
2054
days inactive
2054
days old
2 comments
3 participants
participants (3)
-
derschjo＠gmail.com -
kylevowen＠gmail.com -
rodsmallwood52＠btinternet.com