30 Aug
2000
30 Aug
'00
3:51 p.m.
Hi, gang.
Over the weekend, I picked up an old audio-to-TTL or RS-232
interface at a hamfest (AEA CP-1, for those of you who know what
it is....) with joystick-port TTL cable, but no RS-232 components
installed. (That might be a project for later, since I have the
book/schemo/parts list).
I want to use either one of my C-64's or one of my IIe's with the
interface, but I lack the necessary software. Since we all love old
software, and I know several of us are hams, I figured this would be
as good a place as any to start looking.
If I can't find anything, I'll try installing the RS-232 components to
the motherboard and see if I can get a regular serial port to work
and try it on my pc. But I'd really rather use the older machines for
this. CW receive/decode is a priority, since I can still send with a
paddle, and I'd like to try decoding some RTTY if possible.
Can anyone help?
Thanks.
Paul Braun WD9GCO
Cygnus Productions
nerdware_nospam(a)laidbak.com
31 Aug
31 Aug
2:41 a.m.
Hello Paul
On 30-Aug-00, you wrote:
Hi, gang.
Over the weekend, I picked up an old audio-to-TTL or RS-232
interface at a hamfest (AEA CP-1, for those of you who know what
it is....) with joystick-port TTL cable, but no RS-232 components
installed. (That might be a project for later, since I have the
book/schemo/parts list).
I want to use either one of my C-64's or one of my IIe's with the
interface, but I lack the necessary software. Since we all love old
software, and I know several of us are hams, I figured this would be
as good a place as any to start looking.
If I can't find anything, I'll try installing the RS-232 components to
the motherboard and see if I can get a regular serial port to work
and try it on my pc. But I'd really rather use the older machines for
this. CW receive/decode is a priority, since I can still send with a
paddle, and I'd like to try decoding some RTTY if possible.
Can anyone help?
Thanks.
I have a copy of Hamtext for the C=64 that might work, but it is only good
for Baudot and CW. None of the good stuff like clover or pactor.
You might refresh my memory on the CP1 there. I can't remember if it is TTL
out, RS232 or both. I'd just use the TTL out as that is what the software
driven serial port is on the 64.
If this doesn't pan out, I'd use an active filter for the single tone you
need for CW, rectify it and turn that DC level into something TTL would
like.
Regards
--
Gary Hildebrand
Box 6184
St. Joseph, MO 64506-0184
816-662-2612
or
ghldbrd(a)ccp.com
3:13 p.m.
Hi, Gary.
That would be perfect. I'm not interested in doing packet or amtor
or anything like that. CW and good ol' Baudot RTTY.
The CP-1, as it sits, has a TTL cable attached to it, with a plug on
the end that should fit into a joystick port. There is an RS-232
option, but the components aren't installed on the pcb. However,
the manual has a full schematic and a parts list, with the parts
necessary for the RS-232 option marked. So, I suppose I could add
them if necessary, but if I'm going to use the C=64, the current
cable should do just fine.
This might be a good opportunity to use the SX-64 I've got....
Actually, I've got a choice of two brown 64's as well, so I might just
go with the standard and a regular monitor. I'm not going to be
typing CW, so the slightly awkward keyboard shouldn't be a
problem.
Let me know how you want to do this.
Thanks!
73,
I have a copy of Hamtext for the C=64 that might work,
but it is only good
for Baudot and CW. None of the good stuff like clover or pactor.
You might refresh my memory on the CP1 there. I can't remember if it is
TTL out, RS232 or both. I'd just use the TTL out as that is what the
software driven serial port is on the 64.
If this doesn't pan out, I'd use an active filter for the single tone you
need for CW, rectify it and turn that DC level into something TTL would
like.
Regards
--
Gary Hildebrand
Paul Braun WD9GCO
Cygnus Productions
nerdware_nospam(a)laidbak.com
3:26 p.m.
On Thu, Aug 31, 2000 at 08:41:35AM -0600, Gary Hildebrand wrote:
I have a copy of Hamtext for the C=64 that might work,
but it is only good
for Baudot and CW. None of the good stuff like clover or pactor.
Can you actually do that stuff with a CP1? 'cause I got one too,
I've never used it but got it cheap at a hamfest just in case I ever
get my General...but I thought it could only do CW and RTTY.
--
_______ Shawn T. Rutledge / KB7PWD ecloud(a)bigfoot.com
(_ | |_) http://www.bigfoot.com/~ecloud kb7pwd(a)kb7pwd.ampr.org
__) | | \________________________________________________________________
Get money for spare CPU cycles at http://www.ProcessTree.com/?sponsor=5903
8649
days inactive
8650
days old
3 comments
3 participants
participants (3)
-
ghldbrd＠ccp.com -
nerdware＠laidbak.com -
rutledge＠cx47646-a.phnx1.az.home.com