13 Oct
2004
13 Oct
'04
11:24 a.m.
I need a macintosh telnet (either OS X or OS 9 ) to connect to my PDP11
simulator. I have tried the
simulator that comes with OS X, and another called iTerm. Both are ok
for most stuff but don't work
well for vt50dpy, an RSTS system status monitor. This does work well on
the HP terminal I have (while
its emulating a vt100.)
13 Oct
13 Oct
11:59 a.m.
On Oct 13, 2004, at 4:24 PM, Ron Hudson wrote:
I need a macintosh telnet (either OS X or OS 9 ) to
connect to my
PDP11 simulator. I have tried the
simulator that comes with OS X, and another called iTerm. Both are ok
for most stuff but don't work
well for vt50dpy, an RSTS system status monitor. This does work well
on the HP terminal I have (while
its emulating a vt100.)
Have you looked at zterm? It's my favorite for stuff like that.
--
Kurt Huhn
kurt(a)k-huhn.com
12:26 p.m.
>>>> "Ron" == Ron Hudson
<ron.hudson(a)sbcglobal.net> writes:
Ron> I need a macintosh telnet (either OS X or OS 9 ) to connect to
Ron> my PDP11 simulator. I have tried the simulator that comes with
Ron> OS X, and another called iTerm. Both are ok for most stuff but
Ron> don't work well for vt50dpy, an RSTS system status monitor. This
Ron> does work well on the HP terminal I have (while its emulating a
Ron> vt100.)
You might try firing up X-windows that comes with MAC OS X, then
telnet from an xterm window.
paul
7223
days inactive
7223
days old
2 comments
3 participants
participants (3)
-
kurt＠k-huhn.com -
pkoning＠equallogic.com -
ron.hudson＠sbcglobal.net