Repost since the mail server doesn't seem to like to work outside of business hours I've been looking at the garage, and here's a list (for those who are waiting (you know who you are), I have the SIMMS and the Xyplex ready to go, the post office is a bit of a nightmare now though). (1) the definitely on-topic stuff Sun-3 and Sun-4 VME stuff. (note-Pat gets first call, since he's sending me some E3k stuff) 4x 501-1333 32M Sun 4/400 (/470, /490) ECC RAM (128MB total) 3x 501-1102 8MB Sun-3/200 ECC RAM (also works on 4/260 & 4/280 per FEH) 501-1167 Sun-2 SCSI and 9U->6U adaptor (external DD-50 conn.) 501-1276 FDDI adaptor 501-1539 IPI-2 adaptor 501-1206 Sun 3200 CPU, no PROM onboard. 501-1316 Sun 4300 CPU for parts 501-1203 Asynch serial multiplexor Sun 50-pin drive lunchbox. Assorted stuff (well, the Xylogics can go in a Sun) Xylogics 450 Multibus SMD controller, with or without a Sun VTM adaptor. DIGITAL Alpha Multia VX42 (233MHz, cache) with new battery. SGI IRIS Indigo Express (GR2 XS/XS-24/XZ/Elan) boards: ZB4 Z-Buffer 3x VM2 bitplanes Personal IRIS PSU and TFLU skins (no cracks, door in place) Xyplex Maxserver 4000-series terminal server, telco style outputs, fully populated. still many 4MB 30-pin (9-bit) parity SIMMS (80nS) (free) one Sun USIIi 333MHz/2MB Ecache module (U5/U10) Apple M0130 400K Macintosh floppy DD-50 interface drive box w/ PSU. The "pushing it" section: Unholtz-Dickie OSC-1S sweep sine generator Graphtec WR3200 thermal arraycorder (8-channel chart recorder) HP 3746A selective level measuring set HP 5061A Cesium beam frequency standard (CS beam likely needs work) HP scope frame that I've not tested yet - no plugins, email if interested as I'll test it later. Part of a satellite tracking system. Figure no interest, but I should ask before scrapping. Scientific Atlanta. On a more practical note, these have 3U rack cabinets, aluminum, pretty nice. Not set up for computer stuff specifically, but hackable. Renton, WA. If anyone wants to trade, I'm looking for a decent soldering setup, PROM/PLD programmer (need not be fancy), interesting computer stuff (perhaps some SGI Origin 200 dual processor modules, largish 72-pin parity SIMMS, even very off-topic but a couple of years old stuff that could run W*****s (but won't). Don't think any of this runs up anywhere near the value of a smallish PDP-11 or HP 2100, but figured I'd put it out as a pipe dream), or other electronic/computer stuff. Cash always accepted, too. Otherwise make offer, some I might just give away.