5 Aug
1997
5 Aug
'97
4:33 a.m.
FYI the BA23
(Ihave one) slides into a plastic pedestal case from the back.
or the metal box can have rack mount ears.
This one also alows the whole chasis to slide in and out of the pedestal
case...and it looks like it'd allow it to do it just as easily from the front
as it would the rear. 
4 Aug
4 Aug
2:33 p.m.
On 05-Aug-97, Roger Ivie wrote:
Take a look through the vent holes on top. The BA23 has
a metal flange
about halfway down which prevents it from coming too far out the front. You
can get it out far enough to take off the cover plate over the drive bay,
but that's about it.
On this one, there is a metal plate that runs the whole length of the case,
front to back, and I can see the dual fans through the vent holes. If I pull
the small blocking plate off the front of the machine to allow the chasis to
slide out some though, I can see the metal tab sticking up from the top of the
chasis which would likely block the chasis from sliding out more than 1/2 way
through the front.
Jeff jeffh(a)unix.aardvarkol.com
--
----------------------------------------------------------------------------
Amiga enthusiast and collector of early, classic microcomputers
http://www.geocities.com/siliconvalley/lakes/6757
9783
days inactive
9782
days old
1 comments
2 participants
participants (2)
-
IVIE＠cc.usu.edu -
jeffh＠unix.aardvarkol.com