11 Aug
2002
11 Aug
'02
5:59 a.m.
I also tried to boot RT11 (5.05) but this does not come
further than
doing a few I/O's before the machne stops. I know it isn't supported, but
if I'm not misinformed, it may run anyway?
Yes, it should run just fine. I suspect you still have some
hardware issues...
Megan Gentry
Former RT-11 Developer
+--------------------------------+-------------------------------------+
| Megan Gentry, EMT/B, PP-ASEL | email: gentry at zk3.dec.com (work) |
| Unix Support Engineering Group | mbg at world.std.com (home) |
| Hewlett Packard | (s/ at /@/) |
| 110 Spitbrook Rd. ZK03-2/T43 | URL: http://world.std.com/~mbg/ |
| Nashua, NH 03062 | "pdp-11 programmer - some assembler |
| (603) 884 1055 (DEC '77-'98) | required." - mbg KB1FCA |
+--------------------------------+-------------------------------------+
11 Aug
11 Aug
10:01 a.m.
That problem has been solved now. I had not enough memory in the system to boot
the XM monitor. I assumed it was the SJ one, but alas....
Nice to see what 'show all' is showing on the screen :=)
I also tried to boot RSX 11M 4.5 from the distribution kit, it boots, but only
executes 1 redirect command and stops in MCR (cpu still runs).
When I manually execute the 2nd 'red' command and execute the startup.cmd command
file, it performs the other tasks.
Of course, the first thing to do is to see what the autoconfigure job is saying,
but it stop the machine completely after a few second.
Ah well, first to run the diagnostics to see if the cpu is healthy.
Ed
Megan wrote:
--
The Wanderer | Politici zijn gore oplichters.
quapla(a)xs4all.nl | Europarlementariers: zakkenvullers
http://www.groenenberg.net | en neuspeuteraars.
Unix Lives! M$ Windows is rommel! | Kilometerheffing : De overheid
'97 TL1000S | weet waar je bent geweest!
I also tried to boot RT11 (5.05) but this does not
come further than
doing a few I/O's before the machne stops. I know it isn't supported, but
if I'm not misinformed, it may run anyway?
Yes, it should run just fine. I suspect you still have some
hardware issues...
10:24 a.m.
The Wanderer wrote:
That problem has been solved now. I had not enough
memory in the system to boot
the XM monitor. I assumed it was the SJ one, but alas....
Nice to see what 'show all' is showing on the screen :=)
Jerome Fine replies:
I assume that you booted V5.05 of RT-11? I thought it would run
RT11XM with less than 64 KBytes, but I guess not.
If you have the RT11SJ monitor on the system disk, then the command:
BOOT RT11SJ
will boot the SJ monitor without changing the boot block program.
If you want to change to an unmapped monitor, I suggest RT11FB
instead of SJ. If you have the unmapped device driver on the system
disk, then the command:
COPY/BOOT SY:RT11FB.SYS SY:
(substitute the actual physical device name like DU0: instead of SY:)
will change the boot program for you. Then you can still boot RT11XM
with the BOOT command.
If you have any other question, please ask.
Sincerely yours,
Jerome Fine
--
If you attempted to send a reply and the original e-mail
address has been discontinued due a high volume of junk
e-mail, then the semi-permanent e-mail address can be
obtained by replacing the four characters preceding the
'at' with the four digits of the current year.
8050
days inactive
8050
days old
2 comments
3 participants
participants (3)
-
jhfinepw4z＠compsys.to -
mbg＠TheWorld.com -
quapla＠xs4all.nl