4 Jan
2004
4 Jan
'04
10:37 p.m.
1) ICL Perq T2 with A3 Landscape monitor and running FLEX
2) Rack mount (bare) DECServer 550 (PDP11 inside (if you didn't know))
3) A PDP11/04 (March 1976) with 128Kb, 2 x RK05, 2 x RX02
1) and 2) were last used in 2002 and were then in working order
3) was last used in 2000. Then it had (and still has) a broken RK11D.
I have an untested replacement RK11C. Weighs about 0.25 tonne and
resides in a standard DEC 6' cabinet. Also a current loop LA36 console
I am based in the Cardiff area, but 3) will have to be collected from
about 20 miles north of Cardiff.
Deadline - end February. Anyone interested? Note that I read
cctalk in digest mode and can get a few days behind.
Doug
5 Jan
5 Jan
10:37 a.m.
Doug Peksa wrote:
3) A PDP11/04 (March 1976) with 128Kb, 2 x RK05, 2 x
RX02
Jerome Fine replies:
Do you happen to have any old RT-11 distributions on
any RK05 or RX02 media. I would like to share on
a CD as many old RT-11 distributions as possible.
The RT-11 distributions for V5.0x are available as well
as is V4.00 of RT-11. But I would very much appreciate
having RK05 distributions for V4.00C and for V2x and
V3x of RT-11. I have a number of RX02 distributions
available for V2x and V3x, but that means having multiple
media which is MUCH less convenient.
Anything available?
Sincerely yours,
Jerome Fine
--
If you attempted to send a reply and the original e-mail
address has been discontinued due a high volume of junk
e-mail, then the semi-permanent e-mail address can be
obtained by replacing the four characters preceding the
'at' with the four digits of the current year.
11:29 a.m.
1) ICL Perq T2 with A3 Landscape monitor and running FLEX
For %deity's sake, please could somebody rescue that!. It's an
interesting machine (and I've never seen PERQ FLEX, which I believe has
nothing to do with the 6800/6809 OS).
No, I can't house it, I've already got 4 PERQs (one of each flavour).
-tony
11:50 a.m.
Tony Duell wrote:
I already sent an email this morning, hopefully I was first.
Dan
1) ICL Perq T2
with A3 Landscape monitor and running FLEX
For %deity's sake, please could somebody rescue that!. It's an
interesting machine (and I've never seen PERQ FLEX, which I believe has
nothing to do with the 6800/6809 OS).
No, I can't house it, I've already got 4 PERQs (one of each flavour).
-tony
noon
-----Original Message-----
From: cctalk-bounces(a)classiccmp.org
[mailto:cctalk-bounces@classiccmp.org]On Behalf Of Dan Williams
Sent: 05 January 2004 22:51
To: General(a)neptune.easily.co.uk;
Discussion@neptune.easily.co.uk:On-Topic and Off-Topic Posts
Subject: Re: 'Free to good home'
I already sent an email this morning, hopefully I was first.
I'd love a machine like that but the 'Diff is too far away from here :-/
Having said that I'm hopefully rescuing a MicroVAX I (not II) from
Leicestershire next week or so.....
cheers
--
adrian/witchy
www.binarydinosaurs.co.uk - the online computer museum
www.snakebiteandblack.co.uk - ex-monthly gothic shenanigans :o(
12:20 p.m.
Tony Duell wrote:
>>1) ICL Perq T2 with A3 Landscape monitor and running FLEX
I already sent an email this morning, hopefully I was
first.
Excellent. So it will be saved...
If whoever gets it needs any help getting it going, then feel free to
post here or e-mail me. I have a fair amount of documentation on the PERQ
(and had done hardware repairs, written microcode, and such like...)
Fortunately it's a T2, so there's no head clamping procedure to worry about.
-tony
6 Jan
6 Jan
8:31 a.m.
For
%deity's sake, please could somebody rescue that!. It's an
interesting machine (and I've never seen PERQ FLEX, which I
believe has
nothing to do with the 6800/6809 OS).
No, I can't house it, I've already got 4 PERQs (one of each flavour).
-tony
I already sent an email this morning, hopefully I was first.
9:11 a.m.
-----Original Message-----
From: cctalk-bounces(a)classiccmp.org
[mailto:cctalk-bounces@classiccmp.org]On Behalf Of Antonio Carlini
Sent: 06 January 2004 19:31
To: 'General Discussion: On-Topic and Off-Topic Posts'
Subject: RE: 'Free to good home'
I
already sent an email this morning, hopefully I was first.
Only 'cos I stopped myself on four separate occasions :-)
I'd take it all in a jiffy if I had anywhere to keep it!
I don't think it'll all fit in a jiffy :o)
--
adrian/witchy
www.binarydinosaurs.co.uk - the online computer museum
www.snakebiteandblack.co.uk - ex-monthly gothic shenanigans :o(
7 Jan
7 Jan
8:15 a.m.
Witchy wrote:
Wouldn't matter if it did - don't have room for
one of those either :-)
Antonio
--
---------------
Antonio Carlini arcarlini(a)iee.org
Antonio Carlini wrote:
I'd take it all in a jiffy if I had anywhere to keep it!
I don't think it'll all fit in a jiffy :o)
9:13 a.m.
-----Original Message-----
From: cctalk-bounces(a)classiccmp.org
[mailto:cctalk-bounces@classiccmp.org]On Behalf Of Antonio Carlini
Sent: 07 January 2004 19:16
To: 'General Discussion: On-Topic and Off-Topic Posts'
Subject: RE: 'Free to good home'
Heh! I'm just pondering where I'm going to put this uVAX I, Microtan 65 and
boxed NeXT slab and other stuff I hope to bring back from my travels next
week!
cheers
--
Adrian/Witchy
www.binarydinosaurs.co.uk - possibly the UK's biggest online computer museum
www.snakebiteandblack.co.uk - ex-monthly gothic shenanigans :o(
Witchy wrote:
Wouldn't matter if it did - don't have room for
one of those either :-) Antonio Carlini wrote:
I'd take it all in a jiffy if I had anywhere to keep it!
I don't think it'll all fit in a jiffy :o) 
5 Jan
5 Jan
1:24 p.m.
In message <m1AddEU-000J1xC@p850ug1>
ard(a)p850ug1.demon.co.uk (Tony Duell) wrote:
I'd love to save it, but I'm too far
away - Yorkshire vs. Cardiff. Not going
to happen. :-/
That said, I'd love a PERQ, if only for curiosity value.
Later.
--
Phil. | Acorn Risc PC600 Mk3, SA202, 64MB, 6GB,
philpem(a)dsl.pipex.com | ViewFinder, 10BaseT Ethernet, 2-slice,
http://www.philpem.dsl.pipex.com/ | 48xCD, ARCINv6c IDE, SCSI
1) ICL Perq T2 with A3 Landscape monitor and running FLEX
For %deity's sake, please could somebody rescue that!. It's an
interesting machine (and I've never seen PERQ FLEX, which I believe has
nothing to do with the 6800/6809 OS).
7476
days inactive
7478
days old
10 comments
7 participants
participants (7)
-
arcarlini＠iee.org -
ard＠p850ug1.demon.co.uk -
dan_williams＠ntlworld.com -
jhfinexgs2＠compsys.to -
PeksaDO＠Cardiff.ac.uk -
philpem＠dsl.pipex.com -
witchy＠binarydinosaurs.co.uk