I'm currently trying to revive a TU-56(dectape drive). Unfortunately, it came with a number of flipchip modules missing (the perils of shopping ebay :-( From what I've been able to determine, I need the following boards: flipchip #(quantity) G742 , G859, M941(2), M531, M040, G851, M117(2), M113(3), M302, M908(2), W032(2) M922(2), M923 I've been rummaging through the hamfests in the area, but so far no luck. If anyone has any spares available, please drop me an email note... I'm quite willing to try my hand at repairing blown modules (or fabricating missing ones, if at all feasible). I'm also going to need a Unibus interface. I'm not certain what the module number for the interface is (I've checked the Dec Module Handbook on Megan's site, but none of the descriptions for the tape controllers mentions TU-56). Anyone know which controllers/Module #'s will work with this drive? Also, the TU-56 manual I downloaded indicated that I might/might not need 5 G888 modules (Manchester Read/Write interfaces) depending on what the drive was connected to. Anyone know any more about this? I'm intending to use the drive on an 11/34a. -Thanks in advance to all! -al- -acorda(a)geocities.com