3 Feb
2016
3 Feb
'16
1:28 a.m.
Ulrich Tagge wrote:Hi Glen,
[Snip]
List/change parameters in the Setup table
A - ANSI Video terminal (1) 0=No, 1=Yes = 1
B - Power up 0=Dialog, (1)=Automatic, 2=ODT, 3=24 = 1
C - Restart 0=Dialog, (1)=Automatic, 2=ODT, 3=24 = 1
D - Ignore battery 0=No, 1=Yes = 0
E - PMG 0-(7) 1=.4us, 2=.8, 3=1.6, 4=3.2,...7=25.6 = 7
F - Disable clock CSR 0=No, 1=Yes = 0
G - Force clock interrupts 0=No, 1=Yes = 0
H - Clock 0=Power supply, 1=50Hz, 2=60Hz, 3=800Hz = 1
Does anyone have an idea as to how the choice of the 800Hz
option was made?
I could understand 1000Hz or perhaps 1200Hz which allows
division by both 50 and 60. But 800Hz seems like such an
unlikely value.
On the other hand, on the PRO350, the clock rate was 64Hz
and every 16 ticks, I assume that one tick was discarded so
as to support the appearance of a 60 Hz clock.
Jerome Fine
3 Feb
3 Feb
1:32 a.m.
On Wed, Feb 3, 2016 at 2:28 PM, Jerome H. Fine <jhfinedp3k at compsys.to> wrote:
I wondered about that too and blinked twice when I saw it. I could
only think of some aerospace or military application derived from
doubling a 400Hz power supply frequency... or maybe some lab
application that needs that clock...
Mike
http://www.corestore.org
'No greater love hath a man than he lay down his life for his brother.
Not for millions, not for glory, not for fame.
For one person, in the dark, where no one will ever know or see.'
Ulrich Tagge
wrote:Hi Glen,
[Snip]
List/change parameters in the Setup table
A - ANSI Video terminal (1) 0=No, 1=Yes = 1
B - Power up 0=Dialog, (1)=Automatic, 2=ODT, 3=24 = 1
C - Restart 0=Dialog, (1)=Automatic, 2=ODT, 3=24 = 1
D - Ignore battery 0=No, 1=Yes = 0
E - PMG 0-(7) 1=.4us, 2=.8, 3=1.6, 4=3.2,...7=25.6 = 7
F - Disable clock CSR 0=No, 1=Yes = 0
G - Force clock interrupts 0=No, 1=Yes = 0
H - Clock 0=Power supply, 1=50Hz, 2=60Hz, 3=800Hz = 1
Does anyone have an idea as to how the choice of the 800Hz
option was made?
3324
days inactive
3324
days old
1 comments
2 participants
participants (2)
-
jhfinedp3k＠compsys.to -
tmfdmike＠gmail.com