28 Jan
2018
28 Jan
'18
3:09 a.m.
Or do I need an external profile for my 2/10 if I want to still use LOS.
Thanks,
Corey
corey cohen
u??o? ???o?
28 Jan
28 Jan
7:25 a.m.
On 28 Jan 2018, at 11:09, corey cohen via cctalk
<cctalk at classiccmp.org> wrote:
Or do I need an external profile for my 2/10 if I want to still use LOS.
Thanks,
Corey
corey cohen
u??o? ???o?
It?s been a while since I did this but going from memory you?ll need an external ProFile
to boot from if your LOS install is on the internal widget. You can choose which drive to
boot from at powerup.
?
Adrian/Witchy
Binary Dinosaurs - Celebrating Computing History from 1972 onwards
w: binarydinosaurs.co.uk t: @binarydinosaurs
f: facebook.com/binarydinosaurs
8 a.m.
On 28.01.2018 16:25, Adrian Graham via cctalk wrote:
> On 28 Jan 2018, at 11:09, corey cohen via cctalk <cctalk at classiccmp.org>
wrote:
>
> Or do I need an external profile for my 2/10 if I want to still use LOS.
>
One alternative is to go for an IdeFile : my Lisa has a 260MB IDE harddisk, seven
partitions, and 6 different OS's installed.
All internally.
Not very original, but handy indeed.
Jos
8:06 a.m.
On 28 Jan 2018, at 16:00, Jos Dreesen via cctalk
<cctalk at classiccmp.org> wrote:
On 28.01.2018 16:25, Adrian Graham via cctalk wrote:
6 on a Lisa? I can only think of LOS, XENIX, Workshop. Hm, I?ve got David T Craig?s Lisa
CDs kicking around somewhere, I wonder what else is on those.
?
Adrian/Witchy
Binary Dinosaurs - Celebrating Computing History from 1972 onwards
w: binarydinosaurs.co.uk t: @binarydinosaurs
f: facebook.com/binarydinosaurs
> On 28 Jan 2018, at 11:09, corey cohen via
cctalk <cctalk at classiccmp.org> wrote:
>
> Or do I need an external profile for my 2/10 if I want to still use LOS.
>
One alternative is to go for an IdeFile : my Lisa has a 260MB IDE harddisk, seven
partitions, and 6 different OS's installed.
All internally. 
8:14 a.m.
On 01/28/18 11:06, Adrian Graham via cctalk wrote:
6 on a Lisa? I can only think of LOS, XENIX, Workshop. Hm, I?ve got David T Craig?s Lisa
CDs kicking around somewhere, I wonder what else is on those.
I mean, there's
LOS2, LPW2, LOS3, LPW3, UniPlus, Xenix.? Not sure if
Monitor (a very simple Pascal based OS) will install on a hard drive.?
There's also some GEMDOS image too, but likely that's floppy only.
8:11 a.m.
On 01/28/18 06:09, corey cohen via cctalk wrote:
Or do I need an external profile for my 2/10 if I want
to still use LOS.
Sure, it's possible for LOS to coexist with LPW on the same hard drive,
and you can use that to build LOS apps in LPW, then restart and use them
in LOS.
Installation instructions can be found on page "1-3" of:
http://bitsavers.org/pdf/apple/lisa/workshop_3.0/Lisa_Workshop_3.0_Users_Gu…
There's an option to share space with MacWorks, I don't think you'll
want to do that as you probably won't have enough space for all 3.
If you have a dual parallel port card, you could get upto two more
ProFile drives, or you could get an X/Profile or IDEfile.
I'd backup your LOS documents to floppies before installing LPW just to
be sure you don't lose them.
Once you do this, when you boot, you'll get this "Lisa Environments"
selector screen: http://toastytech.com/guis/lisawsenviron.png
(from http://toastytech.com/guis/lisa3.html )
8:34 a.m.
On 28 Jan 2018, at 16:11, Ray Arachelian via cctalk
<cctalk at classiccmp.org> wrote:
On 01/28/18 06:09, corey cohen via cctalk wrote:
Oh cool. That?s something else added to The List for when I get enough tuits :)
Cheers
A
?
Adrian/Witchy
Binary Dinosaurs - Celebrating Computing History from 1972 onwards
w: binarydinosaurs.co.uk t: @binarydinosaurs
f: facebook.com/binarydinosaurs
Or do I need an external profile for my 2/10 if I
want to still use LOS.
Sure, it's possible for LOS to coexist with LPW on the same hard drive,
and you can use that to build LOS apps in LPW, then restart and use them
in LOS.
Installation instructions can be found on page "1-3" of:
http://bitsavers.org/pdf/apple/lisa/workshop_3.0/Lisa_Workshop_3.0_Users_Gu…
8:58 a.m.
Thanks.
The documentation was confusing as I expected it to be clearer that they could coexist.
So if I run the installer but don?t select erase drive I should be fine. FYI. I am using
an XProfile emulating the widget but don?t want to keep swapping CF cards or changing
switches to select different ?Stars?.
Cheers,
Corey
corey cohen
u??o? ???o?
On Jan 28, 2018, at 11:11 AM, Ray Arachelian <ray
at arachelian.com> wrote:
On 01/28/18 06:09, corey cohen via cctalk wrote:
Or do I need an external profile for my 2/10 if I want to still use LOS.
Sure, it's possible for LOS to coexist with LPW on the same hard drive,
and you can use that to build LOS apps in LPW, then restart and use them
in LOS.
Installation instructions can be found on page "1-3" of:
http://bitsavers.org/pdf/apple/lisa/workshop_3.0/Lisa_Workshop_3.0_Users_Gu…
There's an option to share space with MacWorks, I don't think you'll
want to do that as you probably won't have enough space for all 3.
If you have a dual parallel port card, you could get upto two more
ProFile drives, or you could get an X/Profile or IDEfile.
I'd backup your LOS documents to floppies before installing LPW just to
be sure you don't lose them.
Once you do this, when you boot, you'll get this "Lisa Environments"
selector screen: http://toastytech.com/guis/lisawsenviron.png
(from http://toastytech.com/guis/lisa3.html )
2520
days inactive
2520
days old
7 comments
4 participants
participants (4)
-
binarydinosaurs＠gmail.com -
coreyvcf＠gmail.com -
jos.dreesen＠bluewin.ch -
ray＠arachelian.com