6 Sep
2005
6 Sep
'05
2:12 p.m.
I found this stuff in a pile of scrap boards last week.
<http://www.classiccmp.org/hp/Interdata/> I'm not sure who made them since
I can't find a manufacturer's name on them but a number of the boards have
a tag on them that says "Passed Interdata Processor Test" so perhaps they
were made by Interdata. Does anyone know anything about Interdata or know
who made these? The names on the files are the name that's etched into the
boards and I'm sure that they're some kind of computer boards. The dates
on the ICs range from 1973 to early 1976.
Joe
6 Sep
6 Sep
7:29 p.m.
Intedata was a computer mfg. They made a series of machines (I vaguely
remember a model 4.) They were somewhat like a 360/30, I seem to recall.
Their chief claim to fame was that they were designed to be
microprogrammable. I think one of the implementations used a set of wires
strung through a series of W-shaped transformers. Passing the wire through 1
side resulted in a 0, and the other side gave a 1. Thus it was possible to
change the microprogram and thus extend the instruction set of the computer.
Gil
-----Original Message-----
From: cctalk-bounces at classiccmp.org
[mailto:cctalk-bounces at classiccmp.org] On Behalf Of Joe R.
Sent: Tuesday, September 06, 2005 6:13 PM
To: cctalk at classiccmp.org
Subject: Interdata Computer boards ?
I found this stuff in a pile of scrap boards last week.
<http://www.classiccmp.org/hp/Interdata/> I'm not sure who
made them since I can't find a manufacturer's name on them
but a number of the boards have a tag on them that says
"Passed Interdata Processor Test" so perhaps they were made
by Interdata. Does anyone know anything about Interdata or
know who made these? The names on the files are the name
that's etched into the boards and I'm sure that they're some
kind of computer boards. The dates on the ICs range from
1973 to early 1976.
Joe
10:39 p.m.
I found this stuff in a pile of scrap boards last
week.
<http://www.classiccmp.org/hp/Interdata/> I'm not sure who made them since
I can't find a manufacturer's name on them but a number of the boards have
a tag on them that says "Passed Interdata Processor Test" so perhaps they
were made by Interdata. Does anyone know anything about Interdata or know
who made these? The names on the files are the name that's etched into the
boards and I'm sure that they're some kind of computer boards. The dates
on the ICs range from 1973 to early 1976.
Interdata was a fairly important minicomputer maker in the early 1970s,
but faded by the end of the decade. They were purchased by Perkin-Elmer,
and some Interdata 7s are tagged as Perkin-Elmers. There is still a user
group called Interchange, that keeps the few survivors going.
William Donzelli
aw288 at osfn.org
6867
days inactive
6868
days old
2 comments
3 participants
participants (3)
-
aw288＠osfn.org -
gilcarrick＠comcast.net -
rigdonj＠cfl.rr.com