Then again, it's hard to say. The TK50Z and TZ30
both have fairly
wacked-out SCSI implementations (and not even in exactly the same ways),
and neither is known to work reliably on much of anything other than
a VAXstation.
I've got a TZ30 working on a pdp-11/93 at home, and working just
fine... In fact, I used it to load 2.11BSD, and RT-11 V5.7...
The TZ30 SCSI implementation seems to be more stable than the
TK50Z one...
It may depend on the board you use... I used the RQZX1, which was
qualified with the TZ30...
Megan Gentry
Former RT-11 Developer
+--------------------------------+-------------------------------------+
| Megan Gentry, EMT/B, PP-ASEL | Internet (work):
gentry!zk3.dec.com |
| Unix Support Engineering Group | (home):
mbg!world.std.com |
| Compaq Computer Corporation | addresses need '@' in place of '!' |
| 110 Spitbrook Rd. ZK03-2/T43 | URL:
http://world.std.com/~mbg/ |
| Nashua, NH 03062 | "pdp-11 programmer - some assembler |
| (603) 884 1055 | required." - mbg |
+--------------------------------+-------------------------------------+