8 Mar
8 Mar
7:44 a.m.
700 series were graphical workstations
----- Original Message -----
From: "Joe R." <rigdonj(a)cfl.rr.com>
To: <cctalk(a)classiccmp.org>
Sent: Monday, March 08, 2004 12:41 PM
Subject: Anyone familar with the HP 9000 700i Series computers?
The title says it all.
Joe
---
[This E-mail scanned for viruses by Declude Virus]
9:10 a.m.
On Mon, 8 Mar 2004 12:44:40 -0600
"Jay West" <jwest(a)classiccmp.org> wrote:
700 series were graphical workstations
... with
PA-RISC 1.1 CPUs.
;-)
--
tsch??,
Jochen
Homepage: http://www.unixag-kl.fh-kl.de/~jkunz/
9 Mar
9 Mar
1:15 a.m.
At 09:10 PM 3/8/04 +0100, Jochen wrote:
On Mon, 8 Mar 2004 12:44:40 -0600
"Jay West" <jwest(a)classiccmp.org> wrote:
Once I figured out what model it was (745i/50) I searched and found this
site <http://www.openpa.net/systems/pace.html>. It's got some good
descriptions of the PA RISC CPUs, OS ports etc.
Joe
700 series were graphical workstations
...
with PA-RISC 1.1 CPUs.
;-)
--
8 Mar
8 Mar
9:52 a.m.
Jay,
Can you (or anyone else on the list) get around the password on one of
these? It's running HP-UX 9.05. The OS is installed on a MountainGate
IncreMeg 1 Gb removeable hard drive (nice drive!) I found that this one was
used on the Final Assembly Test Station for the Predator Autopilot!
Joe
At 12:44 PM 3/8/04 -0600, you wrote:
700 series were graphical workstations
----- Original Message -----
From: "Joe R." <rigdonj(a)cfl.rr.com>
To: <cctalk(a)classiccmp.org>
Sent: Monday, March 08, 2004 12:41 PM
Subject: Anyone familar with the HP 9000 700i Series computers?
The title says it all.
Joe
---
[This E-mail scanned for viruses by Declude Virus]
9:59 a.m.
The age-old trick is boot to single user mode, then change the password with
the passwd command.
As I recall on HP-UX, during the boot process you'll see a line about "init
something something"... I believe you hit space here, then type the same
init line but append "-s" to designate going to single user. If this totally
vague and possibly inaccurate email doesn't help, let me know and I'll go
boot up a box to refresh my memory.
Jay West
----- Original Message -----
From: "Joe R." <rigdonj(a)cfl.rr.com>
To: "General Discussion: On-Topic and Off-Topic Posts"
<cctalk(a)classiccmp.org>rg>; "Steve Robertson"
<steven_j_robertson(a)hotmail.com>
Sent: Monday, March 08, 2004 2:52 PM
Subject: Re: Anyone familar with the HP 9000 700i Series computers?
Jay,
Can you (or anyone else on the list) get around the password on one of
these? It's running HP-UX 9.05. The OS is installed on a MountainGate
IncreMeg 1 Gb removeable hard drive (nice drive!) I found that this one
was
used on the Final Assembly Test Station for the
Predator Autopilot!
Joe
At 12:44 PM 3/8/04 -0600, you wrote:
---
[This E-mail scanned for viruses by Declude Virus]
700 series were graphical workstations
----- Original Message -----
From: "Joe R." <rigdonj(a)cfl.rr.com>
To: <cctalk(a)classiccmp.org>
Sent: Monday, March 08, 2004 12:41 PM
Subject: Anyone familar with the HP 9000 700i Series computers?
The title says it all.
Joe
---
[This E-mail scanned for viruses by Declude Virus]
9 Mar
9 Mar
9:02 a.m.
At 02:59 PM 3/8/04 -0600, you wrote:
The age-old trick is boot to single user mode, then
change the password with
the passwd command.
Well I've tried everything that I can think of and everything that
everyone suggested. I get the ISL> prompt but I can't run PASSWD. The help
screen says to use LS to display th ISL utilities. When I do that the only
things listed are FS, HPUX and ODE. I tried to execute a couple of common
programs like VI and it doesn't find them either. One of the Man pages that
I found online
<http://www.informatik.uni-frankfurt.de/doc/man/hpux/isl.1m.html> said that
if you turn the Autoboot off and then load ISL that you will have access to
"any isl command name or the name of any utility available on the system"
but that doesn't seem to be the case.
HELP!
Joe
As I recall on HP-UX, during the boot process you'll see a line about "init
something something"... I believe you hit space here, then type the same
init line but append "-s" to designate going to single user. If this totally
vague and possibly inaccurate email doesn't help, let me know and I'll go
boot up a box to refresh my memory.
Jay West
----- Original Message -----
From: "Joe R." <rigdonj(a)cfl.rr.com>
To: "General Discussion: On-Topic and Off-Topic Posts"
<cctalk(a)classiccmp.org>rg>; "Steve Robertson"
<steven_j_robertson(a)hotmail.com>
Sent: Monday, March 08, 2004 2:52 PM
Subject: Re: Anyone familar with the HP 9000 700i Series computers?
Jay,
Can you (or anyone else on the list) get around the password on one of
these? It's running HP-UX 9.05. The OS is installed on a MountainGate
IncreMeg 1 Gb removeable hard drive (nice drive!) I found that this one
was
used on the Final Assembly Test Station for the
Predator Autopilot!
Joe
At 12:44 PM 3/8/04 -0600, you wrote:
---
[This E-mail scanned for viruses by Declude Virus]
700 series were graphical workstations
----- Original Message -----
From: "Joe R." <rigdonj(a)cfl.rr.com>
To: <cctalk(a)classiccmp.org>
Sent: Monday, March 08, 2004 12:41 PM
Subject: Anyone familar with the HP 9000 700i Series computers?
The title says it all.
Joe
---
[This E-mail scanned for viruses by Declude Virus]
9:32 a.m.
I believe I saw someone post the correct incantation later on the list than
the below email... interacting with ISL and doing hpux -is or somesuch.
Jay
----- Original Message -----
From: "Joe R." <rigdonj(a)cfl.rr.com>
To: "General Discussion: On-Topic and Off-Topic Posts"
<cctalk(a)classiccmp.org>
Sent: Tuesday, March 09, 2004 2:02 PM
Subject: Re: Anyone familar with the HP 9000 700i Series computers?
that
---
[This E-mail scanned for viruses by Declude Virus]
At 02:59 PM 3/8/04 -0600, you wrote:
>The age-old trick is boot to single user mode, then change the password
with
the passwd
command.
Well I've tried everything that I can think of and everything that
everyone suggested. I get the ISL> prompt but I can't run PASSWD. The help
screen says to use LS to display th ISL utilities. When I do that the only
things listed are FS, HPUX and ODE. I tried to execute a couple of common
programs like VI and it doesn't find them either. One of the Man pages I found online
<http://www.informatik.uni-frankfurt.de/doc/man/hpux/isl.1m.html> said
that
if you turn the Autoboot off and then load ISL that
you will have access
to
"any isl command name or the name of any utility
available on the system"
but that doesn't seem to be the case.
HELP!
Joe
>
>As I recall on HP-UX, during the boot process you'll see a line about
"init
>something something"... I believe you hit
space here, then type the same
>init line but append "-s" to designate going to single user. If this
totally
>vague and possibly inaccurate email doesn't
help, let me know and I'll go
>boot up a box to refresh my memory.
>
>Jay West
>----- Original Message -----
>From: "Joe R." <rigdonj(a)cfl.rr.com>
>To: "General Discussion: On-Topic and Off-Topic Posts"
><cctalk(a)classiccmp.org>p.org>; "Steve Robertson"
<steven_j_robertson(a)hotmail.com>
>Sent: Monday, March 08, 2004 2:52 PM
>Subject: Re: Anyone familar with the HP 9000 700i Series computers?
>
>
>> Jay,
>>
>> Can you (or anyone else on the list) get around the password on one
of
these? It's running HP-UX 9.05. The OS is
installed on a MountainGate
IncreMeg 1 Gb removeable hard drive (nice drive!) I found that this one
was
used on the Final Assembly Test Station for the
Predator Autopilot!
Joe
At 12:44 PM 3/8/04 -0600, you wrote:
---
[This E-mail scanned for viruses by Declude Virus]
700 series were graphical workstations
----- Original Message -----
From: "Joe R." <rigdonj(a)cfl.rr.com>
To: <cctalk(a)classiccmp.org>
Sent: Monday, March 08, 2004 12:41 PM
Subject: Anyone familar with the HP 9000 700i Series computers?
> The title says it all.
>
> Joe
>
---
[This E-mail scanned for viruses by Declude Virus]
9:49 a.m.
On Tue, 9 Mar 2004, Joe R. wrote:
At 02:59 PM 3/8/04 -0600, you wrote:
I found this little note to myself in my home directory. Its probably
something I found on the net...
Have someone type "sync" about four times while the system is idle.
Cycle power on the machine and when the prompt comes for the autoboot
stop it, say you want to boot from the primary path, and you want to
interact with IPL. Type "hpux -is (;0)/hp-ux" for 9.X and
"hpux -is (;0)/stand/vmunix" for 10.X and it will bring the system
up in single user mode. Depending on your filesystem layout you
may need to mount the /usr partition. When it's up, do what you
need to get a password file in place and then run
"/etc/shutdown -r now" for 9.X or "/usr/sbin/shutdown -r now" for
10.X. It will probably do some file system checks but should be ok.
Peter Wallace
The age-old trick is boot to single user mode,
then change the password with
the passwd command.
Well I've tried everything that I can think of and everything that
everyone suggested. I get the ISL> prompt but I can't run PASSWD. The help
screen says to use LS to display th ISL utilities. When I do that the only
things listed are FS, HPUX and ODE. I tried to execute a couple of common
programs like VI and it doesn't find them either. One of the Man pages that
I found online
<http://www.informatik.uni-frankfurt.de/doc/man/hpux/isl.1m.html> said that
if you turn the Autoboot off and then load ISL that you will have access to
"any isl command name or the name of any utility available on the system"
but that doesn't seem to be the case.
2:51 a.m.
Interrupt the boot process to get to the ISL prompt (you have 10
seconds to interrupt once it finishes its initial hw checks)..
Then give it:
hpux -is
which will boot into single user mode.
-Bob
Jay,
Can you (or anyone else on the list) get around the password on one of
these? It's running HP-UX 9.05. The OS is installed on a MountainGate
IncreMeg 1 Gb removeable hard drive (nice drive!) I found that this one was
used on the Final Assembly Test Station for the Predator Autopilot!
Joe
At 12:44 PM 3/8/04 -0600, you wrote:
>700 series were graphical workstations
>----- Original Message -----
>From: "Joe R." <rigdonj(a)cfl.rr.com>
>To: <cctalk(a)classiccmp.org>
>Sent: Monday, March 08, 2004 12:41 PM
>Subject: Anyone familar with the HP 9000 700i Series computers?
>
>
>> The title says it all.
>>
>> Joe
>>
>---
>[This E-mail scanned for viruses by Declude Virus]
>
>
--
bbrown(a)harpercollege.edu #### #### Bob Brown - KB9LFR
Harper Community College ## ## ## Systems Administrator
Palatine IL USA #### #### Saved by grace
7442
days inactive
7443
days old
9 comments
5 participants
participants (5)
-
bbrown＠harpercollege.edu -
jkunz＠unixag-kl.fh-kl.de -
jwest＠classiccmp.org -
pcw＠mesanet.com -
rigdonj＠cfl.rr.com