Didn't the H7420 , which replaced the H742, use that also? The H742 uses a
different one .
On Thu, Jun 6, 2019 at 9:07 AM Noel Chiappa via cctalk <
cctalk at classiccmp.org> wrote:
I finally fixed the power supply in my PDP-11/10S
... For those who
have original 5411086s that haven't failed yet, you might want to
make up a little pigtail with an inline fuse holder.
Congratulations, and a great blog write-up.
The issue you point out (lack of fusing for some components on the +15V
board) will of course apply to not just -11/10S's, but any -11 which uses
the H765, either for the CPU box (e.g. /04, /34) or for an expansion box.
This is important enough that I think I'll add a writeup to the CHWiki
article for that:
which restates the problem, and the proposed solution. (I also should check
to see if the H742 uses the same 15V board; it uses the same 'bricks', so