Hello,
thanks, but sadly on that thread there are no pics or references that could
help with the current issue.
Alessandro
-----Messaggio originale-----
Da: cctalk-bounces at
classiccmp.org [mailto:cctalk-bounces at
classiccmp.org] Per
conto di Pontus
Inviato: luned? 21 ottobre 2013 00:34
A: General Discussion: On-Topic and Off-Topic Posts
Oggetto: Re: Fuel MNB 060-0140-004 repair, help to identify a resistance
Not sure I can help much. (I don't know where my original Fuel PSU is).
But you might find some help in my thread on nekochan (the SGI forum):
http://forums.nekochan.net/viewtopic.php?f=3&t=16725574
I ended up adapting an ATX PSU for use in the Fuel.
/P
On 10/20/2013 02:02 PM, Mazzini Alessandro wrote:
Hello,
Long story short, a SGI Fuel psu MNB 060-0140-004 Rev b died with a
bang and now the person who gave me the Fuel is looking at it to try to
repair.
He found a resistance blown (so bad that's unreadable) on the primary
R25
Near the leveling capacitor on the rectifier.
Any chance that someone has a datasheet or can read the value of R25 ?
(good pics are also ok, I think)
Thanks,
Alessandro