9 Aug
2001
9 Aug
'01
10:02 a.m.
It's a bit of a drive, but I'm in Atlanta. That might be fun.
Ken
9 Aug
9 Aug
10:44 a.m.
New subject: MIT Flea Market on 8/19?
Does anyone know if there'll be an MIT flea market on August 19th? I'll be
in the Boston area on business from the 12th to the 23rd and thought I'd do
some scroungin' over the weekend. If it's on, I could also use fairly
precise directions. I'll be staying in Nashua, NH -- down the street from
ZKO from the DEC folks in the group -- I'm pretty familiar with the general
area, but don't really know my way around Cambridge.
-- Tony
12:31 p.m.
New subject: MIT Flea Market on 8/19?
As far as I know, it should be happening. I used to live out that way, but
don't anymore, so I have to rely on my friend to shop for me:-)
As far as directions, it is in a parking garage and associated lot. As I
recall, it was off something like Main Street and Ames (or there abouts),
down around Kendall Square.
From Nashua, you probably want to take 93 into
Cambridge and get off on
McGrath Hwy (28) or possibly take 93 to Boston Memorial
Drive and go back
over the Longfellow bridge to Cambridge.
I sent email to my friend to see if he knows the exact address -- if he
replies, I will forward it...
--tom
At 11:44 AM 8/9/01 -0400, you wrote:
Does anyone know if there'll be an MIT flea market
on August 19th? I'll be
in the Boston area on business from the 12th to the 23rd and thought I'd do
some scroungin' over the weekend. If it's on, I could also use fairly
precise directions. I'll be staying in Nashua, NH -- down the street from
ZKO from the DEC folks in the group -- I'm pretty familiar with the general
area, but don't really know my way around Cambridge.
-- Tony
1:17 p.m.
New subject: MIT Flea Market on 8/19?
Correction, the MIT flee is at the corner of Main and Albany Streets.
--tom
3:04 p.m.
New subject: PDP11 ME11-L board locations ?
Hello,
I have a ME11-L backplane and two sets of core memory board, but
I am unable to locate a document indicating the board locations.
The boards are: G110, G231, and H214 (two sets)
Can someone please lookup (or point me to an online document)
which boards go into which slots?
--tnx
--tom
9:38 p.m.
New subject: MIT Flea Market on 8/19?
Yes
Get out at the Leverett circle direction Storrow drive/MGH. and the
SaltAndPepper bridge. Get off Storrow drive towards MGH (exit ramp on left
lane! crazy!), before you pass under the T, take a right towards Cambridge
, over that bridge straight all the way 1 mi or so, Cambridge Marriott to
your left until u hit the Draper Labs bridge over the traffic lane Easily
recognized. Just before that , before u cross the rails, at the light, take
a left to the next light, then a right: Ur there. Look for chubby guys
geekily dressed schlepping what looks like the remainders of a carwreck,
and junky cars with crazy antennae on their roofs.
Fred
6 p.m.
New subject: Does anyone have an Exidy Sorcerer 2?
Does anyone have an Exidy Sorcerer 2? The reason I ask, is I need to
know about modifications to the PCB that don't show on the schematics.
Specifically, there is some rewiring in the Reset circuitry on my
computer, which of course deviates from the schematics and which I have
no way of verifying. I would like to know if this is factory or
post-factory, or standard or non-standard, or at least correctly done.
Anyone have one to look at?
Thanks,
Louis
8553
days inactive
8553
days old
6 comments
5 participants
participants (5)
-
fdebros＠verizon.net -
ken＠seefried.com -
louiss＠gate.net -
tony.eros＠machm.org -
uban＠ubanproductions.com