8 Oct
2005
8 Oct
'05
3:54 p.m.
Does anyone have the wiring details for the Pertec-to-Overland Data TX-8 or TX-16 cable
used on OD's non-SCSI 9-track equipment? It's got a D-sub 62-pin male connector
on one end and two 50 conductor female edge connectors on the other labeled P1 and P2.
I might be able to figure this one out, but if someone's got the wiring diagram (or
knows of a source) , I'd be obliged.
Thanks,
Chuck
8 Oct
8 Oct
7:23 p.m.
I'll see if the manuals I have on the tx's have a pinout.
Jim
On 10/8/05, Chuck Guzis <cclist at sydex.com> wrote:
Does anyone have the wiring details for the Pertec-to-Overland Data TX-8
or TX-16 cable used on OD's non-SCSI 9-track equipment? It's got a D-sub
62-pin male connector on one end and two 50 conductor female edge connectors
on the other labeled P1 and P2.
I might be able to figure this one out, but if someone's got the wiring
diagram (or knows of a source) , I'd be obliged.
Thanks,
Chuck
10:06 p.m.
----- Oprindelig meddelelse -----
Fra: "jim stephens" <james.w.stephens at gmail.com>
Til: "General Discussion: On-Topic and Off-Topic Posts" <cctalk at
classiccmp.org>
Sendt: 9. oktober 2005 04:23
Emne: Re: Ringout on Overland Data TX-8/TX-16 cable?
I'll see if the manuals I have on the tx's have a pinout.
Jim
On 10/8/05, Chuck Guzis <cclist at sydex.com> wrote:
Does anyone have the wiring details for the Pertec-to-Overland Data TX-8
or TX-16 cable used on OD's non-SCSI 9-track equipment? It's got a D-sub
62-pin male connector on one end and two 50 conductor female edge connectors
on the other labeled P1 and P2.
That would be great, as I have 3 or 4 Pertec cables endning in sub-d connectors.
They have different layout. I know some come from a TX-8/TXi16, and others from
a blue Overland adapter, but I can't remember whatswhat
Nico
7014
days inactive
7015
days old
2 comments
3 participants
participants (3)
-
cclist＠sydex.com -
james.w.stephens＠gmail.com -
nico＠FARUMDATA.DK