This seller just had that kind of cruddy 11/05 for sale recently, this item
is in nicer shape, but I would not expect it to work "out of the box". It
may have been the companion RAM to the 11/05. I have a similar set up for
my 11/40 (in full sized chassis, etc. but same principle).
On Fri, Aug 20, 2021 at 7:04 PM Steve Malikoff via cctalk <
cctalk at classiccmp.org> wrote:
I just saw there is an ME11 Memory Expansion unit on
eBay (not mine),
Until seeing this one I had not heard of any other units out there apart
from the one I recovered
(ex-BHP steelworks) a few years ago. Mine was connected by a flexprint
cable to a rebadged PDP-11/15.
If anyone here ends up with it, I have an OpenSCAD model of the Mazak
bracket p/n 1211221 that holds
the regular 5-1/4" DEC fascia panel onto the front of the H-909 cabinet
this unit uses.
This is the same cabinet as the slimline PDP-11/05 and to be honest when I
found the ME11 that's
what I thought it was, and that the console and CPU boards were missing. I
then found the fascia panel
with the original brackets close by, and it fitted exactly.
I've printed a few from PET and they work as well as the originals
(including the threaded hole), so
I could do a few more for whoever gets the eBay one should they want them.
I am slowly scanning the ME11 print set too as I've not found any online
copy out there so far.